Over 1M Posts • 84K Topics • 9K Authors

FS: Parting out my '94 GT (black) PICTURES! - 6G Celicas Forums

Topic #81722 38 posts Started by shaq
Hey everyone,

READ ALL:

I know some of you may hate me for this, but I have totaled my second 6th gen celi. frown.gif Unlike the first time when my neighbor hit as it was parked, this time it was my fault. This time I rolled it. DON"T GET AHEAD OF YOURSELF AND JUMP TO CONCLUSIONS!!!! Believe it or not it's still in good condition. From the way i hit the hill, most of the car was not damaged. I landed on the roof (upside down). I rolled on the driver's side first, so the door and rear panel along with the roof and sunroof are bad. I am not a very good mechanic but have friends who are. I am listing the parts that I know I can do myself with friends. Other things like engine components will be difficult for me, so if you want them, I am willing for you to do it yourself, if you so choose.

If anyone wants to buy the whole car and use it for anything they want, I will sell it for $1250 firm because of the many usable and good condition parts plus an engine and trans that are in good shape. Car does run and drive, but due to the windshield being shattered, it is not drivable on the roads. But come with a trailer and load her up and go!

Here it goes:

GOOD/non-affected PARTS:

-passenger door/mirror/window
-ALL interior seats (Front and rear)
-Headlights (Both low and high beam)
-Tail lights
-Side markers
-Hood
-Rear Bumper
-Rear hatch w/ glass and wiper
-2 post spoiler
-Center console pieces
-Aftermarket ALPINE headunit
-Interior odds and ends
-2 stock shift knobs and 1 carbon fiber knob
-Injen IS series SRI
-Carpets
-Spare tire and accessories
-Speakers
-Exhaust (Newer muffler, under 5k miles)
-Driver's front quarter panel
-Door panels (driver and passenger)
-Gas cap/door
-Window regulator of Driver's door



Parts for sale that are damaged but usable, cheaper prices

-Passenger front quarter panel (bent in two spots, NOT cracked)
-Front bumper (majority of damage is on the passenger side. Not the worst. bent/squished and a few of the plastic grill bar things are broke)


Engine Parts

-Willing to take apart things that are easy to access and break down.
-5SFE engine (219k miles) and 5 spd transmission together. (Only if someone wants to come and take them out themselves) Selling together!

If you want pics, please tell me exactly what you want pics of!!!

Please respond with questions and I will get back to you. PM and calling are also good ways of getting in contact. I'm very fair and honest. I will only tell you things that I know are true. If I am unaware of something, I will not just make stuff up.

This post has been edited by shaq: Feb 7, 2012 - 5:31 PM
Would you be willing to cut harness up lol I need some plugs
>
QUOTE (foxcraze @ Dec 4, 2011 - 5:25 PM) *
>Would you be willing to cut harness up lol I need some plugs
Sorry, trying to keep the engine as together as possible. Maybe a little later.
Pictures?

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
Wow.. i feel for ya..
post pix plz

"The buy my stuff, for help make great finish project of celica fund!"
oh also intereste in the rear brakes.. are they disk? and are they unharmed?

"The buy my stuff, for help make great finish project of celica fund!"
>
QUOTE (richee3 @ Dec 4, 2011 - 8:06 PM) *
>Pictures?
What would you like pics of? Please be specific so I can make it easier for you and myself.


>
QUOTE (mandrek @ Dec 4, 2011 - 9:06 PM) *
>Wow.. i feel for ya..
post pix plz
What would you like pics of?


IF ANYONE WANTS PICS, PLEASE TELL ME WHAT YOU WANT PICS OF. IT MAKES IT EASIER AMD MORE EFFICIENT.

IF ANYONE WANTS PICS, PLEASE TELL ME WHAT YOU WANT PICS OF. IT MAKES IT EASIER AMD MORE EFFICIENT.


>
QUOTE (mandrek @ Dec 4, 2011 - 9:06 PM) *
>Wow.. i feel for ya..
post pix plz
What exactly do you want pics of?
>
QUOTE (mandrek @ Dec 4, 2011 - 9:06 PM) *
>Wow.. i feel for ya..
post pix plz
What exactly do you want pics of?
Just take pics of the outside and interior.

How much for center console lid and shift boot shipped to 37604?
>
QUOTE (bradshaw75 @ Dec 6, 2011 - 1:16 AM) *
>How much for center console lid and shift boot shipped to 37604?
pm'd
how much for the carbon fiber knob shipped to 93063 and a picture please?
>
QUOTE (CAcelica29 @ Dec 6, 2011 - 3:55 PM) *
>how much for the carbon fiber knob shipped to 93063 and a picture please?
I will get on that ASAP for ya. might be a day or two.
>
QUOTE (shaq @ Dec 6, 2011 - 5:21 PM) *
>>
QUOTE (CAcelica29 @ Dec 6, 2011 - 3:55 PM) *
>how much for the carbon fiber knob shipped to 93063 and a picture please?
I will get on that ASAP for ya. might be a day or two.




no worries you can just pm it to me if you like
Im looking for the black bracket which has 3 studs which you place on the bumper, pokes thru to the bumper, and you use the nuts to hold in place.

-Jeff

You say you don't understand how we go dumb, but have you ever been where i'm from?-=-] Livin it in tha bay's a lil different [-=-
>
QUOTE (CaliJeff @ Dec 6, 2011 - 8:42 PM) *
>Im looking for the black bracket which has 3 studs which you place on the bumper, pokes thru to the bumper, and you use the nuts to hold in place.

-Jeff


Front or rear bumper? I'm not quite sure what your talking about?
how much for drivers and passanger panels shipped to 78214. what conditions are they in? include both window controls? pictures please
Stock exhaust? And you alright from the wreck?
>
QUOTE (94ce1ica @ Dec 7, 2011 - 10:31 AM) *
>how much for drivers and passanger panels shipped to 78214. what conditions are they in? include both window controls? pictures please

I'm not sure the price of shipping. I'm in MD so it might be pretty expensive. but I can still try to figure out. There is someone who wants the passenger panel. so you can have the driver door panel.
>
QUOTE (Redmann813 @ Dec 7, 2011 - 12:10 PM) *
>Stock exhaust? And you alright from the wreck?
It is stock, but I'm not sure if I'll be able to part it out because it involves getting the car lifted and cutting the exhaust apart.
The front bumper. It's what connects and holds the bumper to the fender. It's about a 1.5' height, 1" width and 1" length

You say you don't understand how we go dumb, but have you ever been where i'm from?-=-] Livin it in tha bay's a lil different [-=-
what kind of speakers do you have? are they factory? if they are how much for all 4 shipped to 78214?
i asked about your shift knob already but im also interested in the rear bumper cover if in good condition. pics of both would be great thanks.
Hey everyone!!! I know I'm a little behind with updates, but school is almost over for the semester and then I will get down to business. I still have everyone's names for different parts. I have a list that I made with the order of people who asked. I will try and get pics up ASAP, but school is my top priority at the moment!!!

Thanks for understanding
>
QUOTE (shaq @ Dec 19, 2011 - 9:47 PM) *
>Hey everyone!!! I know I'm a little behind with updates, but school is almost over for the semester and then I will get down to business. I still have everyone's names for different parts. I have a list that I made with the order of people who asked. I will try and get pics up ASAP, but school is my top priority at the moment!!!

Thanks for understanding

i get that man i have finals right now too.
rear hatch area cover/lid and rear strut covers? lemme know. thanks.

proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]309,000 miles n' ....dead-> ALIVE AGAIN!! ~14,000 miles driven
Center console Bezel pieces price and pictures please.....
Need drivers front fender... Condition? Price? Shipped to 55733
i would be interested in the engine harness from ecu to fusebox bolt , really need one