Well I had 6 of 8 bolts snap on my 5sfe and there ugly
flywheel bolts - 6G Celicas Forums
o wow. my clutch just went out too. I hope mine doesnt look like this.
dude! i hate to tell you, but you need to replace that crankshaft. i wouldnt trust it to be true looking like that. how the hell did that happen?
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
>
Lol I'm gonna put bolts back in it and I only paid 1000$ for the car.
if the motor blows I'll probably put a 3mz in as a swap.
Ya it looks bad but a new crank is gonna be close to the cost of the car
QUOTE (Smaay @ Jan 3, 2012 - 6:57 PM) 
>dude! i hate to tell you, but you need to replace that crankshaft. i wouldnt trust it to be true looking like that. how the hell did that happen?
Lol I'm gonna put bolts back in it and I only paid 1000$ for the car.
if the motor blows I'll probably put a 3mz in as a swap.
Ya it looks bad but a new crank is gonna be close to the cost of the car
Did they seize when you were trying to remove them?
ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582rGRX133 Toyota Mark X 350s
>
No the snaped off when I was driving down the road
QUOTE (Cuts_the_Pilot @ Jan 4, 2012 - 8:25 AM)
>Did they seize when you were trying to remove them?
No the snaped off when I was driving down the road
That is really unfortunate, that would have went bang in a big way surely?
Can you knock them out with a centre punch? Perhaps using some loctite freeze release too?
This post has been edited by Cuts_the_Pilot: Jan 5, 2012 - 3:49 PM
Can you knock them out with a centre punch? Perhaps using some loctite freeze release too?
This post has been edited by Cuts_the_Pilot: Jan 5, 2012 - 3:49 PM
ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582rGRX133 Toyota Mark X 350s
an easy out will work just fine. just drill a small hole into them and the easy out will do the rest.
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
Hes got all but one out so far then were going to put the flywheel an everything back in with new toyota bolts
An I think they snapped off due to being over torqued when installed
An I think they snapped off due to being over torqued when installed
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
WOW.. holy isht!!!! yeah. you can see that the bolts in the pic have a sort of "twist" to the remaining metal.. ARP has replacment bolts for not to much... just a suggestion..
good luck!!!
good luck!!!
"The buy my stuff, for help make great finish project of celica fund!"
>
Dealer had bolts for 12$ and t got 3 bolts out with my fingers.
like Kurt said all but one and there not in tight just in deep were you can get anything on them to twist.
But yea gives me a chance to clean everything like I should have done in the first place lol..
All clean
QUOTE (mandrek @ Jan 4, 2012 - 7:08 PM)
>WOW.. holy isht!!!! yeah. you can see that the bolts in the pic have a sort of "twist" to the remaining metal.. ARP has replacment bolts for not to much... just a suggestion..
good luck!!!
good luck!!!
Dealer had bolts for 12$ and t got 3 bolts out with my fingers.
like Kurt said all but one and there not in tight just in deep were you can get anything on them to twist.
But yea gives me a chance to clean everything like I should have done in the first place lol..
All clean
Picking up my parts tomarrow
Kurt95gt is coming down to help this weekend.
awesome!!!! take pix and show us when its done!!!!
"The buy my stuff, for help make great finish project of celica fund!"
>
Will do that I love looking at pix so I will start posting them
QUOTE (mandrek @ Jan 6, 2012 - 12:19 AM)
>awesome!!!! take pix and show us when its done!!!!
Will do that I love looking at pix so I will start posting them
Gonna be nice to work on a celica thats not mine for awhile lol
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
>
I know what you mean
QUOTE (kurt95gt @ Jan 6, 2012 - 3:11 AM)
>Gonna be nice to work on a celica thats not mine for awhile lol
I know what you mean
this forum really needs a "like" and "dislike" button...
BTW:
>
"LIKE" this!!!!!
BTW:
>
QUOTE
>Gonna be nice to work on a celica thats not mine for awhile lol
"LIKE" this!!!!!
"The buy my stuff, for help make great finish project of celica fund!"
Parts are in at noon today
Its like Christmas again lol
Hot dog I got it out
>
yeah. love the feeling of new parts.. lol at this point better than x-mas since it' snot more cloths
>
AWSOME!!!!! are you going to "chase" the holes now with a tap to make sure that the threads are ok?
QUOTE (dakotahwyatt @ Jan 6, 2012 - 1:35 PM)
>
Its like Christmas again lol
Its like Christmas again lol
yeah. love the feeling of new parts.. lol at this point better than x-mas since it' snot more cloths
>
QUOTE (dakotahwyatt @ Jan 6, 2012 - 4:01 PM)
>
Hot dog I got it out
Hot dog I got it out
AWSOME!!!!! are you going to "chase" the holes now with a tap to make sure that the threads are ok?
"The buy my stuff, for help make great finish project of celica fund!"
Yea I have to go buy a bigger one lol
>
yeah i hate it when i find that out... best thing is to go and get a kit and then supplement the kit w/ w/e you don't have.. though a word of caution... tap and die set is one of those cases that you deff get what you pay for..
QUOTE (dakotahwyatt @ Jan 6, 2012 - 4:11 PM)
>Yea I have to go buy a bigger one lol
yeah i hate it when i find that out... best thing is to go and get a kit and then supplement the kit w/ w/e you don't have.. though a word of caution... tap and die set is one of those cases that you deff get what you pay for..
"The buy my stuff, for help make great finish project of celica fund!"
>
No joke lol I don't plan on spending less than 10$$ for one tap
QUOTE (mandrek @ Jan 6, 2012 - 4:24 PM)
>>
yeah i hate it when i find that out... best thing is to go and get a kit and then supplement the kit w/ w/e you don't have.. though a word of caution... tap and die set is one of those cases that you deff get what you pay for..
QUOTE (dakotahwyatt @ Jan 6, 2012 - 4:11 PM)
>Yea I have to go buy a bigger one lol
yeah i hate it when i find that out... best thing is to go and get a kit and then supplement the kit w/ w/e you don't have.. though a word of caution... tap and die set is one of those cases that you deff get what you pay for..
No joke lol I don't plan on spending less than 10$$ for one tap
>
yeah if its the one im thinking it is, it will be at least $20.. ouch.. i payed $25 for a 12x1.25 and that was after a good bit of shopping for it at 4 different local stores..
QUOTE (dakotahwyatt @ Jan 6, 2012 - 4:26 PM)
>>
No joke lol I don't plan on spending less than 10$$ for one tap
QUOTE (mandrek @ Jan 6, 2012 - 4:24 PM)
>>
yeah i hate it when i find that out... best thing is to go and get a kit and then supplement the kit w/ w/e you don't have.. though a word of caution... tap and die set is one of those cases that you deff get what you pay for..
QUOTE (dakotahwyatt @ Jan 6, 2012 - 4:11 PM)
>Yea I have to go buy a bigger one lol
yeah i hate it when i find that out... best thing is to go and get a kit and then supplement the kit w/ w/e you don't have.. though a word of caution... tap and die set is one of those cases that you deff get what you pay for..
No joke lol I don't plan on spending less than 10$$ for one tap
yeah if its the one im thinking it is, it will be at least $20.. ouch.. i payed $25 for a 12x1.25 and that was after a good bit of shopping for it at 4 different local stores..
"The buy my stuff, for help make great finish project of celica fund!"
20$ ain't bad lol I don't mind buying tools they pay for them self. Over time I will get my moneys worth.I hope everything I've done on the fourm is up to par
Just a side note I just got my tracking number for my kikasours motor mounts ha ha :-) !!!!
She's back in the car.
Thanks to Kurt and his wife lol I had a blast lol
Came home from lunch and the trans was in the car lol hmm
Yea i want one of those self nounting trannys likr you got lol
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n