Over 1M Posts • 84K Topics • 9K Authors

no engine codes - 6G Celicas Forums

Topic #82376 8 posts Started by xrav22
Hi there can anyone help I put the paper clip on te1 and e1 and turn the key to the on position and no blinking or anything. Light just stays on. My engine light has been on for 2 days now. Car runs fine by the way.
Thx

This post has been edited by xrav22: Feb 11, 2012 - 7:44 PM
ok so you have a CEL on but when you put the clip in it does not flash any codes? hhmmmm i dont know whats going on here

This post has been edited by Smaay: Feb 11, 2012 - 10:08 PM

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
>
QUOTE (xrav22 @ Feb 11, 2012 - 8:08 PM) *
>Hi there can anyone help I put the paper clip on te1 and e1 and turn the key to the on position and no blinking or anything. Light just stays on. My engine light has been on for 2 days now. Car runs fine by the way.
Thx

After I put in the clip I get in the car turn the ignition to on and the cel is just on still no flashing at all. I am following the guide that is a stickie.
Any Ideas?

http://www.6gc.net/howto/determine_check_engine_light_codes

This post has been edited by xrav22: Feb 12, 2012 - 12:06 AM
sounds like you are doing it right, maybe its not storing the codes???

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
if you have a 96+, you cant read the codes with a paper clip, you need an obdII reader.

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
It says he has a '97 on his profile so he will need the reader.
>
QUOTE (mkernz22 @ Feb 12, 2012 - 1:18 PM) *
>It says he has a '97 on his profile so he will need the reader.

Thanks for the help I will be able to get my code soon.


p0420 = weak catalytic converter but it has not come back on .

This post has been edited by xrav22: Feb 14, 2012 - 3:04 PM
Dang, i should have caught that. yeah you need an ODB-II reader.

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac