rave2n

#1

2 Post spoiler 50$ + Shipping SOLD



Alt. Less then a year old, working perfect. 50 + shipping



50+ shipping - Distributor about a year old, with new cap. I'll throw the wires in free, they are about a year or so old as well. All working perfect.

Also have a set of rear KYB GR2s brand new in the box. - SOLD

I have the ebay header as well, but is quite large and welded to the downpipe all the way to the second cat. Will require some finesse (Money) to remove and ship. Pending

Everything else on my old black celica is up for sale, which is really just interior pieces, anything really under the hood that isn't listed below.

Items that are gone, or already swapped over, or damaged from wreck

Master Cylinder
Slave cylinder
Clutch rubber line to firewall
Throttle Cable
Intake
Seat Covers
Rear Lights
Projectors
Clear Highs
Headunit Amp speakers
Driver side Control Arm
Both Seats are useless
Floor Mats
Rear View Mirror is busted
Door Panels both busted from wreck
Rain Guards busted
Jack spare, and cover transferred over.
Front Bumper
Driver side fender
Splitters

Otherwise, plenty of other good parts if anyone is in need..just ask, I'll tell.

This post has been edited by rave2n: Apr 21, 2012 - 7:19 PM

ricochet1490

#2

all headlights a total loss?

rave2n

#3

>

QUOTE (ricochet1490 @ Mar 4, 2012 - 9:55 PM)

>all headlights a total loss?

I have an OEM set off the GT, will grab pics in the morn.

ricochet1490

#4

don't need the oem ones lol- thought you might have damaged the projectors, but I remember now, only the one projector got damaged.

do you have the factory mud flaps?

rear hatch visor?

splitters?

I dont' know what is and is not for sale, just throwing times out.

This post has been edited by ricochet1490: Mar 4, 2012 - 11:01 PM

rave2n

#5

>

QUOTE (ricochet1490 @ Mar 4, 2012 - 10:57 PM)

>don't need the oem ones lol- thought you might have damaged the projectors, but I remember now, only the one projector got damaged.

do you have the factory mud flaps?

rear hatch visor?

splitters?

I dont' know what is and is not for sale, just throwing times out.

Hmm no flaps, visor was damaged as well, and whats left of splitters transferred over.

Probally grab some picks to make this easier =P

bnr32celica

#6

if the car is black, i need both doors if rust free.

also want the kyb rears as well.

rave2n

#7

>

QUOTE (bnr32celica @ Mar 5, 2012 - 10:16 AM)

>if the car is black, i need both doors if rust free.

also want the kyb rears as well.

Both are black, one repainted black.

No rust on either, the door cards themselves are damaged though, so those would not be included.

Shipping will be difficult....possibly greyhound depending on weight.

Did you want the glass as well?

rave2n

#8

Rear Struts pending.

bnr32celica

#9

Bare doors fine, my doors work well, just rusty.

rave2n

#10

>

QUOTE (bnr32celica @ Mar 5, 2012 - 1:38 PM)

>Bare doors fine, my doors work well, just rusty.

Exellent, PM coming your way.

rave2n

#11

Rust Free Doors









they need a little buffing, but easy enough to accomplish.

This post has been edited by rave2n: Mar 6, 2012 - 10:20 AM

SwissFerdi

#12

Hmm...I make no promises because I'm not sure if I can allow myself the expenditure, but I'm interested in that header.

This post has been edited by SwissFerdi: Mar 6, 2012 - 10:28 AM

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

rave2n

#13

>

QUOTE (SwissFerdi @ Mar 6, 2012 - 10:27 AM)

>Hmm...I make no promises because I'm not sure if I can allow myself the expenditure, but I'm interested in that header.

Ah well you are close, so it actually will save you quite a bit.

Do keep in mind, which I have not said, the header to downpipe gasket is blown...will have to scoop up another, or make one. Been patching it, but that'll come right off.

With you being so close, you can travel on up, we'll tear it off, throw me 40 bucks and enjoy not having to get it welded =) Total cost after purchase was like 180 with the welding. Probally got ripped, but it was installed =P

I'll probally end up just cutting behind the second cat to get it off, I could unbolt, but cutting is more fun then potentially burning myself with the mapp gas

SwissFerdi

#14

>

QUOTE (rave2n @ Mar 6, 2012 - 10:38 AM)

>Ah well you are close, so it actually will save you quite a bit.

Do keep in mind, which I have not said, the header to downpipe gasket is blown...will have to scoop up another, or make one. Been patching it, but that'll come right off.

With you being so close, you can travel on up, we'll tear it off, throw me 40 bucks and enjoy not having to get it welded =) Total cost after purchase was like 180 with the welding. Probally got ripped, but it was installed =P

I'll probally end up just cutting behind the second cat to get it off, I could unbolt, but cutting is more fun then potentially burning myself with the mapp gas

My good man, I was hoping you'd venture in that direction. Very kind of you. As silly as it sounds, I've got some mandatory expenditures coming up (thank you, government), so just keep the thing on the market. If I find you still have it in a few weeks, I'll gladly take you up on your excellent offer.

This post has been edited by SwissFerdi: Mar 6, 2012 - 10:44 AM

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

d_boice

#15

you wouldnt want to cut the passenger side rear quarter panel off would you? i have rust and im trying to get rid of it. id pay for blades if its takes a few.

This post has been edited by d_boice: Mar 6, 2012 - 2:01 PM

rave2n

#16

>

QUOTE (d_boice @ Mar 6, 2012 - 3:00 PM)

>you wouldnt want to cut the passenger side rear quarter panel off would you? i have rust and im trying to get rid of it. id pay for blades if its takes a few.

Don't really see a problem with it....and I really want anything that can help the community to go before I send it to the wrecker to destroy it.

If you could find a picture of the area you want, and draw some lines on where you want the cuts, I'll grab my saw and figure it out.

To do such a task though I would require some sort of deposit on the shipping and such, as its a bit of a odd request, but I'm willing =P

rave2n

#17

Daily bump.

Tell me what you want, what you really really want..._____________

Manual Swap Bits Pending

rave2n

#18

Back in town bump.

cheela

#19

how bad are the rain guards?

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

rave2n

#20

>

QUOTE (cheela @ Mar 12, 2012 - 8:55 AM)

>how bad are the rain guards?

One is fine, but the other that was repaired prior snapped on the repair. Pretty much a whole repair over

rave2n

#21

The daily bump.

PaukST

#22

Does it have cruise control? My ST came with cruise control but I'm missing all the engine-bay cruise components.

---

1989 Celica ST Automatic "King Cobra" -- 2005-20061994 Celica ST 5-speed "King Cobra II" -- 2011-????

rave2n

#23

>

QUOTE (PaukST @ Mar 17, 2012 - 12:50 PM)

>Does it have cruise control? My ST came with cruise control but I'm missing all the engine-bay cruise components.

Yessir it does. I could tear those out today while I'm changing the PS pump on the GT if you'd like. Ship out Monday.

40+shipping? PM your zip if interested.

rave2n

#24

Bump...

Stop inquiring about parts if you have no intent on purchasing them. That is all.

PaukST

#25

Sorry, I thought I tracked this topic, but evidently I didn't... and yes, I'm actually quite interested, Pm'ing you my Zip right now.

---

1989 Celica ST Automatic "King Cobra" -- 2005-20061994 Celica ST 5-speed "King Cobra II" -- 2011-????

rave2n

#26

>

QUOTE (rave2n @ Mar 4, 2012 - 5:24 PM)

>

2 Post spoiler 50$ + Shipping



Alt. Less then a year old, working perfect. 50 + shipping



50+ shipping - Distributor about a year old, with new cap. I'll throw the wires in free, they are about a year or so old as well. All working perfect.

Also have a set of rear KYB GR2s brand new in the box. - SOLD

I have the ebay header as well, but is quite large and welded to the downpipe all the way to the second cat. Will require some finesse (Money) to remove and ship. Pending

Everything else on my old black celica is up for sale, which is really just interior pieces, anything really under the hood that isn't listed below.

Items that are gone, or already swapped over, or damaged from wreck

Master Cylinder
Slave cylinder
Clutch rubber line to firewall
Throttle Cable
Intake
Seat Covers
Rear Lights
Projectors
Clear Highs
Headunit Amp speakers
Driver side Control Arm
Both Seats are useless
Floor Mats
Rear View Mirror is busted
Door Panels both busted from wreck
Rain Guards busted
Jack spare, and cover transferred over.
Front Bumper
Driver side fender
Splitters

Otherwise, plenty of other good parts if anyone is in need..just ask, I'll tell.

Under hood cruise components sold.

celi_gt_racer

#27

Is it a Hatchback car? and is the rear bumper cover in good condition? Shoot me an email response @ Damattsta2000@gmail.com if you don't mind. Thanks buddy

PaukST

#28

It looks like you still have your windshield washer reservoir... If the whole pump/reservoir unit's still intact, let me know how much you'd like for the whole thing (pump, reservoir, lines and sprayers).

---

1989 Celica ST Automatic "King Cobra" -- 2005-20061994 Celica ST 5-speed "King Cobra II" -- 2011-????

mandrek

#29

how much you looking to get for the doors. plz PM me, thank you

---

"The buy my stuff, for help make great finish project of celica fund!"

3WayStunna

#30

How much for the rolling chassis?

---

(\__/)(='.'=) This is bunny. Copy and paste bunny into your(")_(") signature to help him gain world domination.