>

Ill look in the garage in the morning i might still have an extra one since i deleted my ps from the 1mz swap

>
Did you find it?

Just looked an i still have it
Pm me a shipping address an ill figure out a price shipped

>


Doesn't look like you have to, I think you just run new lines to the res.

>

Yeah i was thinking that too. I just wanna know what else im missing. Because i dont want to start the swap and realized im missing something else. What else i need to get besides these parts:
Complete 3sgte with tranny
Hybrid axles
Converted harness
All the mounts
Gt4 shifter cable

Is there any small componets i need to get that i cant use it from the st?
And should i use the fuel pump from the supra non turbo?

so do you not want the rest
I only want like 5 plus shipping

>
What rest? Im saying that i dont know what else im missing. I want evrything i am miasong for this swap!!!

I typed resv
My stupid smart phone put rest

You are going to need off the top of my head:

Rad w/hoses - ST is to small.
If you do not have the IC relay box that comes with a clip, you will be needing that too. Depends also on which IC route you are going. OEM or FMIC
If you want AC, going to have to work that into the equation. Not positive on how to go about that, working on it myself.
Full exhaust overhaul
Gauges, and you'll need to change out your tact to match the new.

If I remember anymore I'll edit =P

Do you have your whinebro fuel pump?

This post has been edited by rave2n: May 12, 2012 - 10:16 PM

>
Yes im geting a megan racing radiator i dont think is bad and ahould be better than oem and its more affordable than mishimoto or koyo
Ill be using front mount IC. So i need the relay box that is next to the radiator if im using a top mount? (Little confuse)
Ill check about the AC because i deff want it.
Exhaust... I got that
Gauges, BOV, fuel pressure regulator and turbo timer got it.
Bit my main consern is what small componets in the engine bay ill be missing?? Anyone? Or thats all i need?

Pm stambo he might be able to help you figure out what yout missing
he did an awsome job on his 3s swapped st

This might help too

Its a newer post
http://www.6gc.net/forums/index.php?showtopic=83732

You will need to get the relay box regardless whether you go with the TM or FM. You will need to do some small wiring to by pass the code 54 if your doing the FM which tweak should take care of.

A stock GT ps reservoir will work as well as GT a/c lines. Gt radiator and hoses will work and will probably have to shorten the Gt hose a little bit as it will kink slightly disrupting coolant flow.

Is your Mr2 tranny already converted to fwd? If not then that should be first priority as you won't want to be waiting on your tranny to finish your swap.

You will need to drill a hole in the frame rail for the side Gt mount to fit and will need a rear gt4 mount for the e153. Changing your tach isn't 100% necessary as all you need to know is that your redline is now at 7k rather then 6k.

Just a heads up, your downpipe will more then likely crack being a solid section dp. Berk makes a great dp that has a built in flexpipe which helps relief the torque and stress the dp goes through. It's easier to change the dp with the motor out of the car lol just a fair warning.

Great thread so far man, the car looks great glad to see your going for the swap!



This post has been edited by Ted95: May 14, 2012 - 11:51 AM

today i went to take some photos, but i wish i have a better camera and be able to take better quality pictures
my next challenge is to take some rolling pictures because i never took any before.

car looks sick man, the wheels and calipers pop on the white!

i'm pretty dure you've been asked this alot, and I think I remember the question being asked in another thread too but....

Y NO JDM TAILS??

>

Could you expand on the reasoning for this? Never heard the stock DP would crack and curious to what lead to that conclusion, being I have the same swap to accomplish soon.

>
Thanks but im.really thinking on getting the nt03 or the varrsoten wheels

>


with the torque of the motor the engine will rock under a hard pull. when the motor gets rocked back under a hard pull the dp is pulling back with the engine as its attached. when the pull is relseased the motor naturally jerks back forward putting stress on the dp and can cause cracking over time. Berk Tech made a dp with a flex pipe in the middle of the dp to help protect the dp from the big pulls as the dp can now have a little give when rocked forward.

>


Excellent, thanks!

>
Lol yes i hate the usdm tail lights and.im.getting the jdm ones but i was trying to get them without the amber but cant find a pair so.im just gonna get them with the amber and remove it myself.

I want your TRD spoiler

i want your car. so sexy

Personally, I don't htink nt03's would look that good on your car.

I think these ones suit it the best.

Those new pics look great. Your car makes me consider switching to white now that I have the GT-Four front end fitted.

So much motivation right there.

I clearly need front/rear end caps!

>
I like white but LOVE white pearl

>
Yeah im not sure too. I saw it on a s2k 18x9.5.with 35 tires and it looked soo clean and nice!
I like my 5ziggen because they are 8.5 wide but now i want something different so I am.considering varrstoen wheels too. In.18x9.5 +35. The front fender will need to pulled just a bit. And it wont look rediculous or with a crazy negative camber. Ill make ot look really nice and.clean.
It wont be the best option for a performance.car ones i drop the 3s but this is my DD and if i want to take it to the track ill just swap wheels in less than 15min.

This post has been edited by diegohiga: May 30, 2012 - 11:30 AM

Are you going to go with the TE37 knock off varrstoens?

>
Thinking about i dont want to spend more than $3k on wheels and tires

Yea no doubt.
I have nothing wrong with "fake wheels" if you're really not putting them to the use they were designed for, EX. Racing.
And they're not as bad with cracking as everyone makes them out to be.