Hi guys
I have a jdm RHD 94 celica and I am thinking to buy jdm clear projectors.
Is the wiring just plug on or the connectors will be different.
I know I will need the electronic unit for the projectors but I don't know much details.

what electronic unit, HIDs? If you are currently on H1 bulbs, no conversion, if you are not, you gotta do some wiring.

http://www.6gc.net/forums/index.php?showtopic=69958

see there for HOW-TO

>
Thanks for your respond.
My headlights are all stock I never changed any of the bulbs since I bought the car, I don't know a lot about bulbs
and I don't care really how bright will be or not.
I am happy the way my headlights work at night so I only wan't the jdm for better look, so do you think I will need any wiring?
Or is it possible to use the existing bulbs in a jdm projector?

This post has been edited by marinos: Apr 10, 2012 - 8:18 AM

You may just need to get different bulbs, because the stock are 9005 for the high beams, and I'm pretty sure the JDM high beams are a different bulb size (Check the electrical/lightint stickies, it will say which bulb in there)
But if the JDM highs do use a 9005 like the USDM highs, then it will simply be plug and play, no need to change any wiring.

You can plug your high beam bulbs in with no issues. The low beams use a different bulb- they use an H1 bulb instead of a 9006. You will need to either cut and splice your wiring to an H1 connector or make a plug and play wiring harness, as posted in the link provided.

http://www.6gc.net/forums/index.php?showtopic=81270

Thanks guys!!!!