I know they are 55w, but i found some that are 80w and 100w...what would happen if i ran one of those wattages? Would the 80 be ok? Dnt wanna set my celi on fire.

This post has been edited by celicaluva79: Apr 17, 2012 - 11:38 AM

just wanted to add even if im late, they will burn your harness first.

even heavy duty harnesses from nokya can't handle high wattage bulbs.

I have 100w bulbs in the fogs, but i have aftermarket wiring since mine is a 95. They've been completely fine

the whole situation is that the plastic of the stock harness and wire gauge is not meant to support higher wattage bulbs so in your case, its very possible if you have an aftermarket fog wiring, that it will work in the fogs and be fine cus I've tried that as well long time ago, but for some reason the low beam harness takes a beating.

This post has been edited by trdproven: Apr 18, 2012 - 2:30 AM