Hello everyone. I'm still parting out my 1994 Toyota Celica ST Hatchback 5 speed car.

I have been pretty successful on this website on parting out my car and its getting down to the last few parts I have left to sell.

This is what I have left to sell;


Gas Tank - $40 before shipping and handling!
Stage 2 Excedy Clutch Disc & Pressure Plate - $125 (good shape) Retails for near $300+
5 Speed Transmission! *Pulled and ready to ship* - $200 obo willing to ship.
Headliner(tan in good shape) - $50
Entire Dash(passenger air bag is blown) - $50
Turn and Light Signal Sticks - $30 each
Glove Box - $15
Plastic Vents and trim around the shifter going up. - $20
Passenger Side Seat - $45 bucks needs cleaning.
x2 Hatch Back Struts - $40 for pair, works great!
Drivers side Door w/ good glass. Roll up window. - $75 obo
Stock Tail Lights in Good shape! - $65 for pair
Shift Linkages etc - Make Offer
Good head n block - SOLD! TY
White face Gauge Cluster - $50 (160-170k i can't remember) sold as is!
2.5 inch Full Exhaust with downpipe flexpipe - SOLD! TY
Stock Throttle Body - $40
Both High beams - $60 for pair! needs special mounting, some tabs are broke but glass is good!
Rear Bumper - $50!
Rear License Plate Bezel - $50
Passenger side Axel - $25
Starter - $50


Those are all prices before shipping and handling. Contact me thru text or PM for final price to your location!

CALL OR TEXT:

804 815 6957 and we can talk more!

Thank you all ~ Brandon!

This post has been edited by BoostedRicer: Jun 8, 2012 - 1:05 PM

How many miles on the motor? would like to know more about it. Looking for kind of a low mileage 7a for a rebuild and swap. How far over was it bored to get it to 2.0l?

And 804 area code is virgina?

>


I would say the motor has about 160k+ and I bought the car with it being bored over to 2.0. It was an original 1.8L factory dohc motor. I still have the cams, timing belt, bottom complete block with flywheel attached. No valve cover though(thats sold) and the oil pan is tabbed for a turbo. When I got the car it needed a head gasket, motor ran but ran choppy due to needing head gasket. It started a few times so I know the engine ran. I put a new headgasket on the motor, but stopped torqueing the head down at 22ft pounds and didn't do the 90degree turn and it didn't seal the headgasket. It needs that to be completed if you wanna keep the head on it to make it run. Intake and exhaust manifold is gone. Its the head and block. Have fuel rail and random misc parts.

Yes 804 is Virginia. My zip is 23061, so google your distance from me. I work mon-thursday 5;30pm-4am so if you want to check it out anytime that works for me, let me know. My cell is 804 815 6957, we can text about it.

bummppppp!!!

interested in the shifter and radio trim pieces, I'm assuming they're the ones you're talking about... let me know how much you need to ship them across the state, 24630 thanks

bummpp

do u have the driver side quarter window?

Nope, surely don't man. Thats been busted out. Sorry..

PS

I have most all the tranny and engine mounts! if anyone needs them, text me

804 815 6957

Bump! check first post to see what i have left to sell! CALL OR TEXT FOR FAST RESPONSE:

804 815 6957

bump

BUMP!! Someone want a tranny or a clutch? Contact me!

PM'd

do you have A/C??
I am searching for the pipes

greetings Christian

>

Na I really don't have that. Sorry bro.

Bump!

I still have altenator in good working order too. May not have listed that...

OH and a Denso Dizzy w/ NGK Wires for sale too!

Text me 804 814 6957 if anyone is interested!

bummmppp ttt

bummppp

Thanks again for the rims. I may take that tank and gauge cluster off of your hands in the near future if you have them still. My tank is leaking around the seams

>


Yeah man i hope your enjoying them. Shoot me a text 804 815 6957 whenever you want them two parts. The sooner the better bro!

BUMP!!!

Hi!

Do you know the model # of the NGK wire? I was wondering if it would fit the 5SFE. Thanks!

Hello everyone. I'm still parting out my 1994 Toyota Celica ST Hatchback 5 speed car.

I have been pretty successful on this website on parting out my car and its getting down to the last few parts I have left to sell.

This is what I have left to sell;


Gas Tank - $40 before shipping and handling!
Stage 2 Excedy Clutch Disc & Pressure Plate - $125 (good shape) Retails for near $300+
5 Speed Transmission! *Pulled and ready to ship* - $200 obo willing to ship.
Headliner(tan in good shape) - $50
Entire Dash(passenger air bag is blown) - $50
Turn and Light Signal Sticks - $30 each
Glove Box - $15
Plastic Vents and trim around the shifter going up. - $20
Passenger Side Seat - $45 bucks needs cleaning.
x2 Hatch Back Struts - $40 for pair, works great!
Drivers side Door w/ good glass. Roll up window. - $75 obo
Stock Tail Lights in Good shape! - $65 for pair
Shift Linkages etc - Make Offer
Good head n block - SOLD! TY
White face Gauge Cluster - $50 (160-170k i can't remember) sold as is!
2.5 inch Full Exhaust with downpipe flexpipe - SOLD! TY
Stock Throttle Body - $40
Both High beams - $60 for pair! needs special mounting, some tabs are broke but glass is good!
Rear Bumper - $50!
Rear License Plate Bezel - $50
Passenger side Axel - $25
Starter - $50


Those are all prices before shipping and handling. Contact me thru text or PM for final price to your location!

CALL OR TEXT:

804 815 6957 and we can talk more!

Thank you all ~ Brandon!

This post has been edited by BoostedRicer: Jun 8, 2012 - 1:05 PM

How many miles on the motor? would like to know more about it. Looking for kind of a low mileage 7a for a rebuild and swap. How far over was it bored to get it to 2.0l?

And 804 area code is virgina?

>


I would say the motor has about 160k+ and I bought the car with it being bored over to 2.0. It was an original 1.8L factory dohc motor. I still have the cams, timing belt, bottom complete block with flywheel attached. No valve cover though(thats sold) and the oil pan is tabbed for a turbo. When I got the car it needed a head gasket, motor ran but ran choppy due to needing head gasket. It started a few times so I know the engine ran. I put a new headgasket on the motor, but stopped torqueing the head down at 22ft pounds and didn't do the 90degree turn and it didn't seal the headgasket. It needs that to be completed if you wanna keep the head on it to make it run. Intake and exhaust manifold is gone. Its the head and block. Have fuel rail and random misc parts.

Yes 804 is Virginia. My zip is 23061, so google your distance from me. I work mon-thursday 5;30pm-4am so if you want to check it out anytime that works for me, let me know. My cell is 804 815 6957, we can text about it.

bummppppp!!!

interested in the shifter and radio trim pieces, I'm assuming they're the ones you're talking about... let me know how much you need to ship them across the state, 24630 thanks

bummpp

do u have the driver side quarter window?

Nope, surely don't man. Thats been busted out. Sorry..

PS

I have most all the tranny and engine mounts! if anyone needs them, text me

804 815 6957

Bump! check first post to see what i have left to sell! CALL OR TEXT FOR FAST RESPONSE:

804 815 6957

bump