Haha yer that's the only part that showed the full sticker, it's not to bad...it should look better when I add the rest to it.
Glad people are liking it though. Thanks guys!
Glad people are liking it though. Thanks guys!
Sticker Bomb - 6G Celicas Forums
For all of you guys keeping track of this, I will be adding the next bits tomorrow sometime so expect some pics within the next 2 days!
Ok guys here is some more progress.
Done bout 3/4 of it now, used a heat gun this time to stretch the stickers a little bit and make them stick better. Havnt applied a clear coat yet. The rest should be done by the end of the week.
Enough of me talking here is some pics:
I need to fix up the ash tray the edging of the sticker is sticking up I no.
As always would love to hear your opinions
Done bout 3/4 of it now, used a heat gun this time to stretch the stickers a little bit and make them stick better. Havnt applied a clear coat yet. The rest should be done by the end of the week.
Enough of me talking here is some pics:
I need to fix up the ash tray the edging of the sticker is sticking up I no.
As always would love to hear your opinions
I think it looks kinda cool.
What are you going to do with the clock? Just cut around the button and sticker right ip the the plastic?
What are you going to do with the clock? Just cut around the button and sticker right ip the the plastic?
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
I gotta say I'm starting to like the look if this.
Keep up the good work
Keep up the good work
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
>
Unsure yet, thinking about sticking the stickers over it then cutting out the idnent of the clock but unsure.
Thanks guys hope everyone is like it!
QUOTE (jordisonjr @ Jul 7, 2012 - 10:23 PM) 
>What are you going to do with the clock? Just cut around the button and sticker right ip the the plastic?
Unsure yet, thinking about sticking the stickers over it then cutting out the idnent of the clock but unsure.
Thanks guys hope everyone is like it!
>
Looking good
Knew some heat would do the trick.
For the clock, what I did was tuck the material behind.. so pop the clock out, lay the material and wrap into the clocks slot then when its all done pop the clock back in. Theres really no space, so excess sticker will stay tucked. Just my .02 cents
QUOTE (Kaizee93 @ Jul 8, 2012 - 5:32 AM)
>>
Unsure yet, thinking about sticking the stickers over it then cutting out the idnent of the clock but unsure.
Thanks guys hope everyone is like it!
QUOTE (jordisonjr @ Jul 7, 2012 - 10:23 PM)
>What are you going to do with the clock? Just cut around the button and sticker right ip the the plastic?
Unsure yet, thinking about sticking the stickers over it then cutting out the idnent of the clock but unsure.
Thanks guys hope everyone is like it!
Looking good
Knew some heat would do the trick. For the clock, what I did was tuck the material behind.. so pop the clock out, lay the material and wrap into the clocks slot then when its all done pop the clock back in. Theres really no space, so excess sticker will stay tucked. Just my .02 cents
6gcHeroes:808hectortimmybatmandiegotigamak
Thought bout this but wasnt sure how hard it would be to take it out and didnt really want to fiddle with it. Is it easy to take out?
This post has been edited by Kaizee93: Jul 8, 2012 - 5:53 AM
This post has been edited by Kaizee93: Jul 8, 2012 - 5:53 AM
>
Not too dificult its only 2 tabs, one on either side that hold it in place.. only trick is after out undo one tab it usually pops back in when you try the other side
QUOTE (Kaizee93 @ Jul 8, 2012 - 6:52 AM)
>Thought bout this but wasnt sure how hard it would be to take it out and didnt really want to fiddle with it. Is it easy to take out?
Not too dificult its only 2 tabs, one on either side that hold it in place.. only trick is after out undo one tab it usually pops back in when you try the other side
6gcHeroes:808hectortimmybatmandiegotigamak
>
thanks heaps I will do this for the last part
QUOTE (smkr3w @ Jul 8, 2012 - 5:58 AM)
>>
Not too dificult its only 2 tabs, one on either side that hold it in place.. only trick is after out undo one tab it usually pops back in when you try the other side
QUOTE (Kaizee93 @ Jul 8, 2012 - 6:52 AM)
>Thought bout this but wasnt sure how hard it would be to take it out and didnt really want to fiddle with it. Is it easy to take out?
Not too dificult its only 2 tabs, one on either side that hold it in place.. only trick is after out undo one tab it usually pops back in when you try the other side
thanks heaps I will do this for the last part
I see Sonic.
2001 Miata LS 5-speed
>
I see 2 Sonics haha
QUOTE (Box @ Jul 8, 2012 - 11:59 PM)
>I see Sonic.
I see 2 Sonics haha
>
No problem
I'm just doing this project vicariously through you
QUOTE (Kaizee93 @ Jul 8, 2012 - 7:48 AM)
>>
thanks heaps I will do this for the last part
QUOTE (smkr3w @ Jul 8, 2012 - 5:58 AM)
>>
Not too dificult its only 2 tabs, one on either side that hold it in place.. only trick is after out undo one tab it usually pops back in when you try the other side
QUOTE (Kaizee93 @ Jul 8, 2012 - 6:52 AM)
>Thought bout this but wasnt sure how hard it would be to take it out and didnt really want to fiddle with it. Is it easy to take out?
Not too dificult its only 2 tabs, one on either side that hold it in place.. only trick is after out undo one tab it usually pops back in when you try the other side
thanks heaps I will do this for the last part
No problem
I'm just doing this project vicariously through you
6gcHeroes:808hectortimmybatmandiegotigamak
Haha I see I see well I hope you like it anyway Thursday I should hopefully have it done by. Starting to like it more and more now
well I hope you like it anyway Thursday I should hopefully have it done by. Starting to like it more and more now
>
wow looks sick!, ive been thinking about doing this, since theres other people here in the stance and fitment scene that have done this, and it looks nice!
QUOTE (Kaizee93 @ Jul 3, 2012 - 3:28 AM)
>Ok so here some photos as promised, Now remember it is NOT finished yet, some feedback would be nice. I will do the rest on the weekend with some other mates.
Ash Tray
Close Up
Center Console
Both
What do you guys think so far?
Ash Tray
Close Up
Center Console
Both
What do you guys think so far?
wow looks sick!, ive been thinking about doing this, since theres other people here in the stance and fitment scene that have done this, and it looks nice!
Thanks man, it's really not that hard to do hey, and the best part is its fairly cheap (for the sheets anyway) and of course it looks good.
Working on it tonight so hopefully might get it ready for a clear coat by tomorrow or the next day.
Ok guys need an opinion here just added last parts and wanted to no if yas reckon I should put the clock back in or not.
Looks good!
Get some pics once you have it installed in the car as well!
Get some pics once you have it installed in the car as well!
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
If you have an aftermarket radio with a clock I wouldn't bother. Just don't reconnect the clock.
2001 Miata LS 5-speed
Yer I don't think I will bother putting the clock back in at this point of time. I'll post up some inside shops soon.
So hit a bit of bad luck last night, the clear coat seemed to react to some parts of the stickers. Thinking maybe because i left it a week to put a coat on it. Anyway I'll post some pics up soon
and I might try get them out later.
and I might try get them out later.
Ok guys heres the pics, I no the car is pretty dirty on the inside so bear with me haha. Love to hear your thoughts and opinions
as always:
Since you guys have been so nice and helpful I decided to do another part inside the car as a bit of a secret
Final look:
Looking In
Thanks for all your thoughts and suggestions.
What Next???
as always:
Since you guys have been so nice and helpful I decided to do another part inside the car as a bit of a secret
Final look:
Looking In
Thanks for all your thoughts and suggestions.
What Next???
Shifter boot surround. Next
That would make the the center console look more complete
That would make the the center console look more complete
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
>
Ditto, and the passenger air vent. Maybe the window switch panels too.
QUOTE (kurt95gt @ Jul 14, 2012 - 8:10 PM)
>Shifter boot surround. Next
That would make the the center console look more complete
That would make the the center console look more complete
Ditto, and the passenger air vent. Maybe the window switch panels too.
2001 Miata LS 5-speed
Was just going to post that too.
I wouldn't do the window switch panels on the doors, but would do the passenger side air vent to match the driver side
I wouldn't do the window switch panels on the doors, but would do the passenger side air vent to match the driver side
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
Ahh yes of course, lol but do yas actually like it?
Honestly yes
An I promise you at the beginning of this thread I was fully prepared to hate it an secretly lol at it in private.
But it turned out really good an looks cool
Guess now I understand why people sticker bomb stuff
Just don't over do it lol
An I promise you at the beginning of this thread I was fully prepared to hate it an secretly lol at it in private.
But it turned out really good an looks cool
Guess now I understand why people sticker bomb stuff
Just don't over do it lol
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
>
Haha glad you like it mate but I don't mind if people hate it. At the end of the day its not their car its mine and
I will do what ever I want to it. I will definitely do the passenger side vent and probably just leave it at that hey.
QUOTE (kurt95gt @ Jul 14, 2012 - 11:19 PM)
>Honestly yes
An I promise you at the beginning of this thread I was fully prepared to hate it an secretly lol at it in private.
But it turned out really good an looks cool
Guess now I understand why people sticker bomb stuff
Just don't over do it lol
An I promise you at the beginning of this thread I was fully prepared to hate it an secretly lol at it in private.
But it turned out really good an looks cool
Guess now I understand why people sticker bomb stuff
Just don't over do it lol
Haha glad you like it mate but I don't mind if people hate it. At the end of the day its not their car its mine and
I will do what ever I want to it. I will definitely do the passenger side vent and probably just leave it at that hey.
Sorry if that came off kinda rude lol
An thanks for the link BTW
An thanks for the link BTW
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
>
Haha no not at all just stating why I do these kind of things Glad you enjoyed it.
QUOTE (kurt95gt @ Jul 14, 2012 - 11:44 PM)
>Sorry if that came off kinda rude lol
An thanks for the link BTW
An thanks for the link BTW
Haha no not at all just stating why I do these kind of things
Glad you enjoyed it.