Well I got a boost controller and I put it on and now its blowing the pipes apart like the BOV aint woking, any suggestions, im only boosting 5 psi!
99 Toyota Tacoma
Is your BOV set for 5psi also? If its to tight and doesn't want to release till say 10psi then you will have boost surge. Try to loosen the bov a bit.
-Bryan-
Member of Team 5sfTe
Well I have no weights in the BOV at all so it should be going off right?
99 Toyota Tacoma
There should be a bolt either on top or the side that you use to tighten or loosen the valve. Tighter for more boost and looser for less.
Member of Team 5sfTe
I had the same problem when I turbo'd mine. Do you have a lip welded around the ends of you pipes?