Over 1M Posts • 84K Topics • 9K Authors

My new BEAMS vert - 6G Celicas Forums

Topic #89160 22 posts Started by pgiorgio
Really enjoying my BEAMS. Everything else is stock except for GT4 front end, exhaust, wheels, and a fifth gear from an s51 transmission. This gives me 34mpg at 60mph, and reduces the rpm (at 60mph) by 300rpm. Put about 4000k miles on it and couldn't be happier with the performance. It really comes alive at 3800rpm. The swap is expensive (I had a professional mechanic do the swap) but I'm glad I chose the BEAMS. Manny did the front end body and paint work.






That's a clean 'vert. Looks great! thumbsup.gif

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
QUOTE (richee3 @ Mar 30, 2013 - 12:59 PM) *
>That's a clean 'vert. Looks great! thumbsup.gif


X2! I'd so rock that!

SPYRO|DARKSPYRO|CYRIL
That looks awesome! Separate question though...how much does that spoiler block your rear window? I don't have a spoiler on mine because the convertible rear window is so tiny.

-Jay95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
I'ts a 95, so the spoiler is a little bigger, but I haven't had a problem.
>
QUOTE (match220 @ Mar 30, 2013 - 4:24 PM) *
>That looks awesome! Separate question though...how much does that spoiler block your rear window? I don't have a spoiler on mine because the convertible rear window is so tiny.

looks great, peter!

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
Where'd you get the s51 5th gear from??
thats a good looking swap, cant argue with that.

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
Bought it from Toyota dealer......forget the part number...>
QUOTE (mkernz22 @ Mar 31, 2013 - 12:18 AM) *
>Where'd you get the s51 5th gear from??

from what ive found searching mr2 forums part numbers should be: 33428-32040 & 33336-33020 for the gears from the s51 for later year s51 with dual syncros
Nice one! I also have a Beams powered red Celi with a GT4 front. Not convertible though, and not with paint as good as yours. smile.gif

Well done.

3SGE Beams VVT-i powered Celica
Wow one of the nicest verts I've seen!

Dude I almost had you
Thats a really clean looking vert, good work.
Love the convertibles! I like the BEAMS engine in that as well, although I have zero experience with them aside from appearance.

I've been thinking about a spoiler for my '97 vert to jazz it up, but can't decide if I like the look. The back of the convertible Celica looks like the designers went on vacation, or just ran out of ideas. I have a couple of ideas, but a spoiler is the easiest bolt on possibilty.
Are there before pictures or has she always been so beautiful?
The car had been repainted some time before I bought it 9 years ago. Manny(pressure2) did the gt4 front conversion and repainted the front 1 year ago. It does stay in the garage most of the time so that helps keep it pretty nice.>
QUOTE (rave2n @ Apr 2, 2013 - 9:43 PM) *
>Are there before pictures or has she always been so beautiful?

absolutely beautiful ride you sir are my idol bowdown.gif
im also going to swap a beams in my vert biggrin.gif

This post has been edited by 1soljaslim5: Apr 9, 2013 - 1:00 AM
Can I get a better pic of your exhaust piping?
hey pgiorgio you may not know since you had a mechanic do the work, but is the beams engine a direct swap in? like will all the lines, hoses, shifter cables, and wiring harness all match the car or did it need a hybrid wiring harness and a bunch more work to make it work? just curious because I am hoping to do a beams swap of my own
>
QUOTE (Ecamp35 @ May 14, 2013 - 10:33 AM) *
>hey pgiorgio you may not know since you had a mechanic do the work, but is the beams engine a direct swap in? like will all the lines, hoses, shifter cables, and wiring harness all match the car or did it need a hybrid wiring harness and a bunch more work to make it work? just curious because I am hoping to do a beams swap of my own


there are 4 members threads that go into deep detail about this... and its easy a 4 year old can do it with the right tools and mechanics doing the lifting

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Thanks, I apreciate it.
I had the opportunity to see this car in person as the CSP meet. I gotta say the car is impeccable inside and out, the swap looks great, and Peter is a great guy.


"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.