Hi there , just wanting to know what size the gearbox oil cooler pipe fittings are on a jdm st205. Wanting to change the crappy old oil cooler and fit braided lines. If any one knows or has done this before any info would be much apprrciate !
Thanks

I have done it, except summit racing's order history only goes back about 1.5 years.


I just took the fittings off the transmission, went to the hardware stores till i found a nut that fit the threads. Then I ordered the appropriate fitting. I do know the fittings I end up buying were for power steering. Looking on summits website but cant find them.



Edit after looking, this maaay be them. m16 x 1.5 (get a m16 x 1.5 bolt and try to thread it to make sure) Really I thought it was m12/m14, but can't remember.


http://www.summitracing.com/parts/brg-925121/overview/

This post has been edited by czwalga: Apr 17, 2013 - 2:09 PM

Thanks for the info , looks promising. Was going to get aeroquip anodised fittings and make up the hose myself. Car is a daily driver though so unfortunately can't have car off road for too long so wanted all the parts ready to fit before starting . Many thanks for your help mate
Sweet rx by the way !!