Have both and swap rotate them monthly.

>
I am going to black it out pretty soon

When I can find a good quality surround that fits the Australian Number plates that I want, I will upgrade to them

Might contact toyota about it

Found this photo from the TOC annual meet early this month:

Just some photos as I was driving home tonight:






And At home:

*removes all the TRD badges* See, much better.

So, The big update is finally here
A few week ago I found a set of Projector Headlights on eBay and promptly purchased them. After a week, they were at my door...
I opened the box, and as usual, one tab was broken and another was split




So I got a bottle of Loctite 406 from my Girlfriends father and repaired those tabs. I also added a washer behind the completely cracked tab for extra strength =]



Now came the adapter problem... The stock wiring in the car doesn't fit the H1 socket on the projectors, and the ADM park lights don't fit in the accent lights either... So an adapter was needed to be made... I got onto eBay and found some extension cables for the stock ADM wiring, and luckily the eBayer gave me the H1 side and the Accent adapters, so all I needed was the Male side for the low beams


And so, this morning I headed over to my Mates house where most of the Car work is done. Here is the 'Before' shot:


Following the 6GC bumper removal guide, hte bumper was off in less than 40mins




After some further troubles of trying to get a 10mm spanner that would fit inbetween the bar and the light, we finally got the High Beams replaced. They are a direct replacement and so no wiring mod was required


Once the low beams were out of the car, it was time for the wiring harness to be made. The eBay extension cable was cut, and the male half was soldered and headshrinked onto the H1 adapter. In 10mins, both sides were made and the adapters were installed and 10mins later, the Low beams were in place. The Accent lights were just soldered directly onto the ADM park light harness:




Testing followed:


After the test was successful, the car was rebuilt and photos were taken. These will be in a second post below

This post has been edited by rentaspace: Jul 13, 2013 - 3:50 AM

And the photo update, I DID wash the car (finally):








Will be getting some high-res photos soon

Yay, yay, yay..... Wait..... You mixed blue and yellow lights -.- Are you planning to change you low beams to the same colour temp you had on there before?

>
The 'Blue' is actually white... The time of day changed that...
And ATM I am not sure, I can get the H1 'Xenon' White Lights for $15, but I don't know if I will...
It will look better I guess

Starting to look pretty schmick here man. I say just bite it and buy yourself some HID's now you have the appropriate headlights!

>
If they weren't illegal, I'd already have them...

I am buying a 6k HID set tomorrow


Some more phone pics:

It's looking good in here!

^Nice Range Rover Sport over there

Looks great with those projectors! I think i should find a proper set for mine! Keep up the good work!

>

>
Thanks Guys

>
Nice Range Rover Sport with a giant dent on the rear quarter panel lol
Neighbors car, along with the Kia Rio

*Cerato Hatch

But that is certainly an interesting combination

>
That house has:
Parents:
- VW Golf

Son 1:
- Toyota Echo Sedan

Spn 2:
Kia Cerato Hatch

Daughter 1 (Doesn't live there but yeah)
- Range Rover Sport
Daughters Husband:
- V8 Maserati of some kind. (Haven't seen it in a while, may of been sold)

This post has been edited by rentaspace: Jul 15, 2013 - 1:31 AM

Projectors look so much better.

>
Get a set for your

Then I'll need to mod them. Have other things to do first anyhow.

>
Just blind other drivers
They don't need to see haha

Especially the assholes in trucks with cheap HID's in their reflector housings...

>
Or go all rally style, massive floodlights on the roof and front, all with HID in a reflector.
Like this, but the roof covered too.

I was just reading the Before and After thread and found that you are not the first!!!



That was ImportChick95 back in 2007! (obviously ) Looks like she moulded hers on though.

>
Would of looked better if the Splits were also moulded in

>
Now why couldn't my car be that colour? *kicks the colour red*

the color chooses you. you cant choose the color.

wooh another $800 greenslip bill today ... gonna have to stop modding until it's paid

A what bill?