jordisonjr

#61

>

QUOTE (jesse09 @ Sep 1, 2015 - 10:30 AM)

>>

QUOTE (jordisonjr @ Sep 1, 2015 - 9:48 AM)

>How the HECK did you get an ST sway bar for 37 dollars?!
Also, waaaay back in the journal, how did you manage to get the gtfour bumper fit with the stock hood without a gap?

I have no clue why it was so cheap. I bought it at $37 on amazon and checked on it the next morning to give 6gc a heads up and it had jumped back up to normal price.

About the bumper. I didn't do the work, a local body shop installed it. But i believe he had to mold/flex the bumper about an inch for it to work. Sorry not much help lol

No Worries, I was just curious what made it fit, whether it was the bumper that was modded or the hood, cause neither appeared to have been modded.
I also thought it may just have been the angle of the photo, but it looked great.

I wish I coudl find a sway bar for that cheap. Where abouts on amazon were you looking? I didn't even realize they sold parts there.

---

-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!

jesse09

#62

>

QUOTE (jordisonjr @ Sep 1, 2015 - 11:42 AM)

>>

QUOTE (jesse09 @ Sep 1, 2015 - 10:30 AM)

>>

QUOTE (jordisonjr @ Sep 1, 2015 - 9:48 AM)

>How the HECK did you get an ST sway bar for 37 dollars?!
Also, waaaay back in the journal, how did you manage to get the gtfour bumper fit with the stock hood without a gap?

I have no clue why it was so cheap. I bought it at $37 on amazon and checked on it the next morning to give 6gc a heads up and it had jumped back up to normal price.

About the bumper. I didn't do the work, a local body shop installed it. But i believe he had to mold/flex the bumper about an inch for it to work. Sorry not much help lol

No Worries, I was just curious what made it fit, whether it was the bumper that was modded or the hood, cause neither appeared to have been modded.
I also thought it may just have been the angle of the photo, but it looked great.

I wish I coudl find a sway bar for that cheap. Where abouts on amazon were you looking? I didn't even realize they sold parts there.

I just searched the model: ST Suspension 51200. I ended up selling it for a little more then what I paid for it tho.

You can find all kinds of stuff on amazon. I've found some hard to find parts by going to the manufacturers sites and getting the model numbers. Search by the model cause search by description is garbage on amazon.

The bumper looked good without the hood and it flowed great. I've had several people ask me how it was done but the guy who did it for me was no longer at that shop.

jesse09

#63

Have everything I need (i think) to tackle the front and rear brake upgrade tomorrow minus brake fluid.

Also, the 4 smaller boxes against the wall are the motor and transmission mounts, hoping to get those done by the end of the month.

BonzaiCelica

#64

Oo rotors for the track

---

Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514

jesse09

#65

>

QUOTE (BonzaiCelica @ Oct 10, 2015 - 5:43 PM)

>Oo rotors for the track

I do eventually want to track it, though that's many months away. I found a good deal on them so I figured why not.

LtSolid

#66

did you get the calipers and brackets powder coated? they look awsome

jesse09

#67

>

QUOTE (LtSolid @ Oct 13, 2015 - 10:22 AM)

>did you get the calipers and brackets powder coated? they look awsome

Thanks!

Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh.

LtSolid

#68

>

QUOTE (jesse09 @ Oct 13, 2015 - 11:29 AM)

>>

QUOTE (LtSolid @ Oct 13, 2015 - 10:22 AM)

>did you get the calipers and brackets powder coated? they look awsome

Thanks!

Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh.

the brake upgrade is gonna make your car look so much better. but one thing tho, you just have to swap out t
he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines.

This post has been edited by LtSolid: Oct 13, 2015 - 2:15 PM

jesse09

#69

>

QUOTE (LtSolid @ Oct 13, 2015 - 3:15 PM)

>>

QUOTE (jesse09 @ Oct 13, 2015 - 11:29 AM)

>>

QUOTE (LtSolid @ Oct 13, 2015 - 10:22 AM)

>did you get the calipers and brackets powder coated? they look awsome

Thanks!

Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh.

the brake upgrade is gonna make your car look so much better. but one thing tho, you just have to swap out t
he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines.

You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears.

You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway.

This post has been edited by jesse09: Oct 13, 2015 - 3:58 PM

Malek

#70

Those calipers came out really nice! Brake upgrades ftw!

---

SPYRO|DARKSPYRO|CYRIL

jesse09

#71

So I didn't expect the EBC green stuff pads to be THIS GREEN. Ya i know that sounds crazy. It doesn't look bad just personally not about the colorful look. I'm gonna dump them and pick up a set of TRD pads for the front and OEM Toyota pads for the rear. Unfortunately cars going to have to sit for about a week until they arrive




Here's a comparison photo of the old cheapo ST rotor vs the slotted EBC GT rotor.

jesse09

#72

>

QUOTE (Malek @ Oct 13, 2015 - 6:31 PM)

>Those calipers came out really nice! Brake upgrades ftw!

Thanks! I'd like to get on your level and do a GT4 updgrade lol

LtSolid

#73

>

QUOTE (jesse09 @ Oct 13, 2015 - 3:56 PM)

>>

QUOTE (LtSolid @ Oct 13, 2015 - 3:15 PM)

>>

QUOTE (jesse09 @ Oct 13, 2015 - 11:29 AM)

>>

QUOTE (LtSolid @ Oct 13, 2015 - 10:22 AM)

>did you get the calipers and brackets powder coated? they look awsome

Thanks!

Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh.

the brake upgrade is gonna make your car look so much better. but one thing tho, you just have to swap out t
he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines.

You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears.

You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway.

thanks for the info! had no idea about the parking brake line. i assumed i could use my ST cable. show some pics of the TRD pads, never knew trd made and still sell pads for our celicas.

jesse09

#74

>

QUOTE (LtSolid @ Oct 15, 2015 - 9:45 AM)

>>

QUOTE (jesse09 @ Oct 13, 2015 - 3:56 PM)

>>

QUOTE (LtSolid @ Oct 13, 2015 - 3:15 PM)

>>

QUOTE (jesse09 @ Oct 13, 2015 - 11:29 AM)

>>

QUOTE (LtSolid @ Oct 13, 2015 - 10:22 AM)

>did you get the calipers and brackets powder coated? they look awsome

Thanks!

Nope, I just cleaned them up really good with a wire brush and brake part cleaner, then painted them with caliper paint and threw on a TTE decal. Turned out a little better than I expected tbh.

the brake upgrade is gonna make your car look so much better. but one thing tho, you just have to swap out t
he GT backing plate, plus bracket, caliper and brake lines? i was thinking just getting the whole spindles from a yard and putting those in with lines.

You will also need the parking brake cables attached to the backing plate. You have to get underneath the car and disconnect them behind the exhaust cover. For some reason this was hardly mentioned so it took me a while to figure out before I found it. This is for the rears.

You can just swap the spindles as well but it seemed harder that way, at least for me since i didn't have tools to remove those really have bolts and I want to say the control arm is usually seized, which involves having to cut it. I found it much easier to take off parts individually since I was gonna clean, paint and swap the hardware anyway.

thanks for the info! had no idea about the parking brake line. i assumed i could use my ST cable. show some pics of the TRD pads, never knew trd made and still sell pads for our celicas.

I just ordered the pads so hopefully they come in next week. They're unavailable at the local dealer but I called another one and they had some in stock. I'll upload some when they come in, until then I'm gonna have to ride on some autozone pads

BonzaiCelica

#75

But those vibrant colors really add flare and awe to your whip in the JDM, seem haven't you seen?

---

Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514

msk59

#76

>

QUOTE (jesse09 @ Aug 6, 2015 - 6:09 PM)

>Added the fairing to complete the roof rack.



Got a few other things that I'm starting to gather parts for, mainly braking upgrade

Hi Jesse09. Nice upgrades. can you post some more pictures of the roof rack. I really like it and tell us what brand it is with the spoiler in the front.
Thanks

jesse09

#77

>

QUOTE (BonzaiCelica @ Oct 15, 2015 - 11:42 PM)

>But those vibrant colors really add flare and awe to your whip in the JDM, seem haven't you seen?

I don't think i've seen it. I wouldn't mind a little green cause I thought the shims would cover up most of it. But it turns out these don't come with shims and installing them isn't recommended. so the green is fully exposed

jesse09

#78

Thanks msk59. Here's some pics of the roof rack

Parts I used are

Yakima Q towers
Yakima Q 11 clips
Yakima stretch kit
Yakima 48" crossbars
Yakima 38" 35 year anniversary fairing
Yakima locks and keys

It's pretty sturdy and sits nice. I bought the q towers, crossbars, locks and keys used. The rest new

msk59

#79

Awesome. Yeh that does looks cool especially with the front spoiler! Thanks very much.

jesse09

#80

So the TRD pads were discontinued as expected. I went ahead and kept the EBC green stuff pads on there and have now put about 200 miles on the new front brake upgrade.

Overall a very good improvement over my factory setup so far. It's not too much or too little. Smooth with hardly any noise but there is a moderate amount of dust that has accumulated.

Hopefully I'll have times for rears this week

4-eyed-freek

#81

I run those exact rotors with brembo pads on my lexus. I track the car 4-5 times a summer, by far the best rotors I have owned!

---

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16

mkernz22

#82

You could've just painted the pad plates a different color?

jesse09

#83

>

QUOTE (mkernz22 @ Oct 26, 2015 - 7:40 PM)

>You could've just painted the pad plates a different color?

I thought about but dont think it would have turned out right. It doesn't bother me as bad as I thought it would

>

QUOTE (4-eyed-freek @ Oct 26, 2015 - 6:12 PM)

>I run those exact rotors with brembo pads on my lexus. I track the car 4-5 times a summer, by far the best rotors I have owned!

Ya these rotors are awesome. Haven't tracked it yet but I'm sure they'll be great

jesse09

#84

Finally got around to swapping the rear drums to disc brake setup.

Big difference. Braking is more controlled and even. Looks a lot cleaner too.

It's taken many months to get all the pieces together and finding the time to install myself, but upgrading all 4 hubs was definitely worth it. Learned a lot in the process

cheela

#85

looks good! I still gotta change my drums out one of these days.

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

LtSolid

#86

same here.i gotta stock up on parts for the winter

jesse09

#87

Thanks. And i'd def recommend doing so. It's not as hard as it is time consuming. Especially if you don't have the money to just shell out for all the parts at once and have to collect them as I did.

Also forgot to mention, I modified my fenders to the JDM/Euro style

And..

They weren't kidding about the brake dust on the green stuff pads, that stuff is quick to collect.

LtSolid

#88

if you dont mind me asking how much and where did you get the duckbill?

i did the usdm fender reflector delete on mine. how hard was it to find the jdms?

jesse09

#89

>

QUOTE (LtSolid @ Jan 28, 2016 - 7:47 PM)

>if you dont mind me asking how much and where did you get the duckbill?

i did the usdm fender reflector delete on mine. how hard was it to find the jdms?

if duckbill is another name for the hatch visor I got it online for $110 but I think they may be out of stock or discontinued. Let me know if you were talking about something else

http://www.ebay.com/itm/HIC-Toyota-Celica-...r-/171495526365

you may want to message them and see if they can get a hold of any. The manufacturer was HIC.

I couldn't find a set of JDM fenders that wouldn't put me over $800 after shipping and painting, so I went for the delete as well.

$40 for the side markers from eBay, plus $50 from salvage yard for fenders along with $200 to paint/modify and I was well below half the cost of actual JDM fenders

LtSolid

#90

>

QUOTE (jesse09 @ Jan 28, 2016 - 8:18 PM)

>>

QUOTE (LtSolid @ Jan 28, 2016 - 7:47 PM)

>if you dont mind me asking how much and where did you get the duckbill?

i did the usdm fender reflector delete on mine. how hard was it to find the jdms?

if duckbill is another name for the hatch visor I got it online for $110 but I think they may be out of stock or discontinued. Let me know if you were talking about something else

http://www.ebay.com/itm/HIC-Toyota-Celica-...r-/171495526365

you may want to message them and see if they can get a hold of any. The manufacturer was HIC.

I couldn't find a set of JDM fenders that wouldn't put me over $800 after shipping and painting, so I went for the delete as well.

$40 for the side markers from eBay, plus $50 from salvage yard for fenders along with $200 to paint/modify and I was well below half the cost of actual JDM fenders

holy ****. you got a deal. ive seen it(duckbill visor w.e) once on ebay for $400. guess i didnt check good enough.

love the look! whats next on the list?!