Killer amp sold my speakers though so no longer need the amp. Specs below. MSRP 449 looking for 200 shipped.
2 Channels @ 4 ohms 180 Watts
2 Channels @ 2 ohms 350 Watts
1 Channel @ 4 ohms (bridged) 700 Watts
Frequency Response 5Hz - 50kHz
Crossover Range 55Hz - 5.5kHz Variable
Bass Boost +15dB @ 45Hz
S/N Ratio 98dB
Input Sensitivity (Low) 220mA - 3.5V
Max current draw 70A @ 751 Watts 20% THD
Idle Current 1.14 Amps
Fuse 3 x 30 Amps
Dimensions 11.25" (L) x 8.0" (W) X 2.375 (H)
The KS amplifiers are a totally "out of the box" rethink of what an amplifier can be. By taking a proven but underutilized Pro Audio amplifier class and bringing it up to date with modern components we can achieve uncompromising sound quality in a compact chassis that makes installation in even the most challenging cars and trucks a breeze.
Switching to a higher class. Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class leading specs with this design.
Why does this class or amplifier perform so well? It's built for music not test tones or noise. Class G/H works with the dynamics of music not against then. When an amplifier is playing music even at full volume, due to its dynamic nature, it is really only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest to the time your 700 watt amp is making less then 350 watts. That's where the KS amp's Class G/H comes in. It's like having 2 amps in one. A 400 watt amp that can be a lot smaller and makes a lot less heat that in a fraction of a second becomes an 800 watt monster. The trick of making this work is striking a balance between switching this high power section on and off. It takes the years of experience Nikola Engineering has to achieve this delicate balance.
This post has been edited by chucho: Sep 12, 2013 - 2:16 PM
2 Channels @ 4 ohms 180 Watts
2 Channels @ 2 ohms 350 Watts
1 Channel @ 4 ohms (bridged) 700 Watts
Frequency Response 5Hz - 50kHz
Crossover Range 55Hz - 5.5kHz Variable
Bass Boost +15dB @ 45Hz
S/N Ratio 98dB
Input Sensitivity (Low) 220mA - 3.5V
Max current draw 70A @ 751 Watts 20% THD
Idle Current 1.14 Amps
Fuse 3 x 30 Amps
Dimensions 11.25" (L) x 8.0" (W) X 2.375 (H)
The KS amplifiers are a totally "out of the box" rethink of what an amplifier can be. By taking a proven but underutilized Pro Audio amplifier class and bringing it up to date with modern components we can achieve uncompromising sound quality in a compact chassis that makes installation in even the most challenging cars and trucks a breeze.
Switching to a higher class. Class G and Class G/H amplifiers offer the best of all possible characteristics. Power output, distortion, efficiency, heat, noise, size are all class leading specs with this design.
Why does this class or amplifier perform so well? It's built for music not test tones or noise. Class G/H works with the dynamics of music not against then. When an amplifier is playing music even at full volume, due to its dynamic nature, it is really only working above 1/2 power about 10% of the time. You only need full power during the very loud passages like the impact of a drum or the pluck of a bass string. The rest to the time your 700 watt amp is making less then 350 watts. That's where the KS amp's Class G/H comes in. It's like having 2 amps in one. A 400 watt amp that can be a lot smaller and makes a lot less heat that in a fraction of a second becomes an 800 watt monster. The trick of making this work is striking a balance between switching this high power section on and off. It takes the years of experience Nikola Engineering has to achieve this delicate balance.
This post has been edited by chucho: Sep 12, 2013 - 2:16 PM
