What all axels will fit a 3sge tranny with LSD
3sge - 6G Celicas Forums
I wish this board was so smart that everytime someone tried to creat a new thread with a question that was already asked in a post it would search that subforum the member is posting it in by word or by certain frases. Totally awesome feature, just saying.
Btw normal gt axles will work
Btw normal gt axles will work
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
>
Do you know where on the tranny it says what tranny it is, my gt axels are to small in diameter
QUOTE (BonzaiCelica @ Jun 29, 2013 - 3:01 PM) 
>I wish this board was so smart that everytime someone tried to creat a new thread with a question that was already asked in a post it would search that subforum the member is posting it in by word or by certain frases. Totally awesome feature, just saying.
Btw normal gt axles will work
Btw normal gt axles will work
Do you know where on the tranny it says what tranny it is, my gt axels are to small in diameter
The 3S-GE came with the E56 & the S54.
which transmission do you have?
which transmission do you have?
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
The USDM S54 axles aren't as beefy as the JDM S54 axles that came with the BEAMS, but they are 100% interchangeable. Which generation 3S-GE do you have? That will help us figure out which trans you have and therefore which axles you need.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
Whats the purpose of the thicker axles, how much thicker are they? Can someone take side by side pics. Wud the ss3 axles actually put more power to the wheels or just cause more weight on the front of the car?
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
I'm not exactly sure what gen 3sge, I bought someone else project and they did not know. I do know it is not beams I will try post pics later today of engine and transmission
Was it from someone here on the forums, specifically this car?
http://www.6gc.net/forums/index.php?showtopic=89926
If its not a BEAMS, it's more than likely a 3rd gen 3S-GE.
>
http://www.6gc.net/forums/index.php?showtopic=89926
If its not a BEAMS, it's more than likely a 3rd gen 3S-GE.
>
QUOTE (95CelicaST @ May 20, 2013 - 10:19 AM)
>Really easy to spot based on the intake manifold... and the BEAMS are super easy.
Gen 1
Gen 2
Gen 3
Gen 4
Gen 5
Gen 1
Gen 2
Gen 3
Gen 4
Gen 5
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
I think engine is 3rd gen
QUOTE (Benny @ Jun 30, 2013 - 6:57 AM)
>I'm not exactly sure what gen 3sge, I bought someone else project and they did not know. I do know it is not beams I will try post pics later today of engine and transmission
I think engine is 3rd gen
Yea that was it,
>
see sticky http://www.6gc.net/forums/index.php?showto...mp;#entry842489
in the trans/axle code: S54-06D. the 6 is used for the axle. as you can see from that thread, there is a bit of difference in the bearings.
Benny as for your transmission.
To find out if it's the E56. its the same case as the GT4's E154F but without the transfer case, and has a plate on the timing belt side, it also supposedly came factory with an external oil cooler. Requires a different clutch & axle setup to that of the S54. My thoughts are following the guys with the 3S-GTE & E153 setup
E56 gearbox
QUOTE (BonzaiCelica @ Jun 30, 2013 - 9:45 PM)
>Whats the purpose of the thicker axles, how much thicker are they? Can someone take side by side pics. Wud the ss3 axles actually put more power to the wheels or just cause more weight on the front of the car?
see sticky http://www.6gc.net/forums/index.php?showto...mp;#entry842489
in the trans/axle code: S54-06D. the 6 is used for the axle. as you can see from that thread, there is a bit of difference in the bearings.
Benny as for your transmission.
To find out if it's the E56. its the same case as the GT4's E154F but without the transfer case, and has a plate on the timing belt side, it also supposedly came factory with an external oil cooler. Requires a different clutch & axle setup to that of the S54. My thoughts are following the guys with the 3S-GTE & E153 setup
E56 gearbox
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
I'm pretty sure it is the E56, what clutch set up goes with that one?
I guess now I need to find some beams axels or 3she axels
I guess now I need to find some beams axels or 3she axels
The BEAMS came with an S54 bolted to it, so it uses the same axles as a USDM ST204 instead of the axles that the 3rd gen 3S-GE/E56 use.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
x2!!
QUOTE (BonzaiCelica @ Jun 30, 2013 - 4:45 AM)
>Whats the purpose of the thicker axles, how much thicker are they? Can someone take side by side pics. Wud the ss3 axles actually put more power to the wheels or just cause more weight on the front of the car?
x2!!
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
Mine seams to be set up to take an external oil cooler
for the clutch setup:
You can use the same clutch cover as you would with a beams/5S-FE swap
You need a specific clutch disc: 31250-32110 or you possibly might be able to use the same disc when the 3S-GTE swappers use the E153
The axles on the SS-II SS E56 are model specific as its using a E series gearbox and superstrut. I cant remember off the top of my head when others have done a beams swap with the S54-06D if they've used their factory axles or the new axles with non-superstrut setup. If they used the new ones you should be using your (if you got them) E series axles, but you cannot use the S series axles.
Bonzai, try reading my above post first.
You can use the same clutch cover as you would with a beams/5S-FE swap
You need a specific clutch disc: 31250-32110 or you possibly might be able to use the same disc when the 3S-GTE swappers use the E153
The axles on the SS-II SS E56 are model specific as its using a E series gearbox and superstrut. I cant remember off the top of my head when others have done a beams swap with the S54-06D if they've used their factory axles or the new axles with non-superstrut setup. If they used the new ones you should be using your (if you got them) E series axles, but you cannot use the S series axles.
Bonzai, try reading my above post first.
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
Norberto where are the pics? PICS DONT WORK
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
>
Well I didn't get the e series axels so ill have to get those but then what outlets woul be best for the least amount of work, meaning switching hubs ect...
QUOTE (Rusty @ Jul 2, 2013 - 5:19 PM)
>for the clutch setup:
You can use the same clutch cover as you would with a beams/5S-FE swap
You need a specific clutch disc: 31250-32110 or you possibly might be able to use the same disc when the 3S-GTE swappers use the E153
The axles on the SS-II SS E56 are model specific as its using a E series gearbox and superstrut. I cant remember off the top of my head when others have done a beams swap with the S54-06D if they've used their factory axles or the new axles with non-superstrut setup. If they used the new ones you should be using your (if you got them) E series axles, but you cannot use the S series axles.
Bonzai, try reading my above post first.
You can use the same clutch cover as you would with a beams/5S-FE swap
You need a specific clutch disc: 31250-32110 or you possibly might be able to use the same disc when the 3S-GTE swappers use the E153
The axles on the SS-II SS E56 are model specific as its using a E series gearbox and superstrut. I cant remember off the top of my head when others have done a beams swap with the S54-06D if they've used their factory axles or the new axles with non-superstrut setup. If they used the new ones you should be using your (if you got them) E series axles, but you cannot use the S series axles.
Bonzai, try reading my above post first.
Well I didn't get the e series axels so ill have to get those but then what outlets woul be best for the least amount of work, meaning switching hubs ect...
Have a look at the details of a E153 swap, that a few people have been doing. As being an E series aswell, there should be a lot more similarities that should help
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
on the subject of what fits what, anyone think a beams rocker cover could fit a 3s-gte gen3 head? lol
i'm changing to caldina intake manifold and front mount, the gen3 cover is ugly lol
i'm changing to caldina intake manifold and front mount, the gen3 cover is ugly lol
Mike W1996 Toyota Celica ST205 GT-FOURGT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC269awhp / 273ft-lbs
>
why was i invited here.
Thicker axles in beams, to handle more torque and hp. Period.
yes they are thicker...
QUOTE (BonzaiCelica @ Jul 3, 2013 - 3:40 AM)
>Norberto where are the pics? PICS DONT WORK
why was i invited here.
Thicker axles in beams, to handle more torque and hp. Period.
yes they are thicker...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Benny which axles did u end up using with that e56 transmission?
Guys, quick question. Can i bolt on a tranny from a gen3 na to my 5sfe 1998 celica?
Thanks,
Martin
Thanks,
Martin
depends what tranny, from what i hear, they have the e56 tranny, which will bolt and axles will be an issue. If its a s54, its no problem. but you have to figure out the tranny you are looking at.
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Thanks! The one im looking at has the axles too. I got to take some pics....
The axles on it are n/a style. No hex bolts....
Martin
This post has been edited by martinmr2: Dec 13, 2013 - 6:03 AM
The axles on it are n/a style. No hex bolts....
Martin
This post has been edited by martinmr2: Dec 13, 2013 - 6:03 AM