Hi
Installing aftermarket central locking, got the 12v constant working fine, grounded well, cannot suss out the lock/unlock connections at all.

The locking unit im installing has two white (lock) wires and one white/black (unlock). After taking advice on here previously i connected the lock wires to the blue/black wire that plugs into the locking module (next to the steering column) but the unlock is supposed to be connected to a blue/green in the same location. I cant find a blue/green so after some googling i went into the solid blue, nothing, tried plenty of alternatives too and nothing.

The unit itself is powering up and clicks when i press lock or unlock on the fob, the LED flashes when set to lock too

Please can someone help, with some connection advice, this is killing my brain now

As far as I remember, lock/unlock wires are located behind the kick panel under the steering wheel. (cheat sheet)

Thanks Nihal

I already had that cheat sheet and just realised im a total idiot, i was looking for a blue/green singular wire not realising that it means a blue wire and a green wire (so technically three connections in total for the locking aspect) - doh!