Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #90683

TRD THERMOSTAT - 6G Celicas Forums

Topic #90683 17 posts Started by mi645
mi645
#1
TRD PART NUMBER FOR THE THERMOSTAT THATS COMPATABLE WITH OUR CARS OR 3SGE 3D GEN.
PRT01-35050-01
IS THIS THE CORRECT 1?
FOUND 1 IN STOCK AT MY DEALERSHIP WITH MY PRICE THEY WILL GIVE IT TO ME FOR 60 BUCKS.
FrankB2
#2
I gave the dealer the VIN for my '97 GT 5SFE, and they told me a new cap was $35. I don't know the part number, or if there's a difference between Toyota and TRD.

DUH!!! I saw thermostat, and thought radiator cap. biggrin.gif I actually called for both, and both were $35 each. $10 for the gasket.

This post has been edited by FrankB2: Sep 21, 2013 - 2:47 PM
Syaoran
#3
Why TRD? The beck/arnley 170*F unit is cheaper and is of very good quality.

This post has been edited by Syaoran: Sep 21, 2013 - 3:40 PM
1993 Celica GT Coupe - sold1994 Celica GT Liftback
mi645
#4
I know our engines run stupid hot.
so I wanted something that opens up earlier than factory spec. I didn't know anything besides trd that made 1
im talking for 3sge. 3d gen not beams not 5sfe +D
Rusty
#5
you'll need a 3S-GE/beams/GTE thermostat, as they have different part # to the 3S-FE going off my complete TRD sticky
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
mi645
#6
I need it for a 3sge not 3sfe
Rusty
#7
Yes, which is what I was stating.

Here is our JDM TRD part number: 16340-SP030
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
mi645
#8
Hey rusty is ur current profile updated with ur car?
Rusty
#9
my profile, yeah I'm pretty sure it is up to date.
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
mi645
#10
Awesome I really appreciate ur help now I'm looking for a down pipe b pipe since forgman never replies to me even tho he has all the parts I need
GTMike
#11
Is it difficult to change the thermostat? Sometimes my temp gauge moves and gives me hot air. Sometimes it does not budge and gives me lukewarm air. The cold is coming to Michigan already! Could this be a sticky thermostat?

Thanks!
'99 Triple Black GT ConvertibleCheck out the "Michigan Toyota Scion and Lexus Crew" on Facebook.
ILoveMySilly97
#12
>
QUOTE (GTMike @ Sep 23, 2013 - 9:14 AM) *
>Is it difficult to change the thermostat? Sometimes my temp gauge moves and gives me hot air. Sometimes it does not budge and gives me lukewarm air. The cold is coming to Michigan already! Could this be a sticky thermostat?

Thanks!


Quickest way to check is to remove the radiator cap and warm up your car. Once the fan kicks in. Look into the rad cap hole and see if the coolant is flowing. If it's flowing then it's opening up. If it's not flowing then it's bad.

To replace the thermostat on our st204 isn't hard. It just sucks that the alternator and oil filter is in the way. You'll have to remove the oil filter for sure to get to it. The alternator is just going to be annoying but you can get by without removing it.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
Syaoran
#13
>
QUOTE (GTMike @ Sep 23, 2013 - 12:14 PM) *
>Is it difficult to change the thermostat? Sometimes my temp gauge moves and gives me hot air. Sometimes it does not budge and gives me lukewarm air. The cold is coming to Michigan already! Could this be a sticky thermostat?

Thanks!



On a 2.2L it's quite easy. The hardest part will be bleeding out the air after changing it and replacing the coolant.

To make it a lot easier you can remove the alternator out of the way. The coolant neck below it requires removal of the two 10mm nuts. It just pulls out once you do and the thermostat will be reachable.

Make sure you drain the coolant first.
1993 Celica GT Coupe - sold1994 Celica GT Liftback
ILoveMySilly97
#14
Oh and if your thermostat housing is plastic. Go ahead and go to AutoZone and buy a cast iron one. The plastic will break and bits can be pushed into your radiator, clogging it up.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
mi645
#15
nah my 3sge came with metal, and I had a customer with a vert 99 5sfe 200k miles he was complaining its slowing down at 35 mph and struggling I turned it off and on a few times on my rack and boom steam of clouds. I check and the thermostat housing the plastic one blew right there almost sprayed 1 of the other techs in the face...
Syaoran
#16
>
QUOTE (ILoveMySilly97 @ Sep 23, 2013 - 3:16 PM) *
>Oh and if your thermostat housing is plastic. Go ahead and go to AutoZone and buy a cast iron one. The plastic will break and bits can be pushed into your radiator, clogging it up.


Cast aluminum*

I didn't know these actually came with a plastic housing at some point... ew.
1993 Celica GT Coupe - sold1994 Celica GT Liftback
ILoveMySilly97
#17
Oh duh. Lol. It's cast aluminum.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
← Back to Topics