I'm in the process of producing Complete intake kits for Both GT and ST's. >>
They will have the following:
1. A mandarel-bent intake pipe-Chrome
2. A 2 1/2'' to 3" connector-(Throttle body to intake)
3. All the hose clamps
4. 2 Clear Blue vaccum hoses.
5. Cone air filter w/velocity stack.

There are two desighns im working on, both of which are identical to Injen designs I have seen.
1. S-bend
2. J-bend

Now right now I have finished the S intake and now i am going to finish the J intake(get it chromed). I will have finished both by the end of the week and will have pics by monday.

The full S intake kit will be around $100 and the J for $80.

Post if you are interested in seeing this go into production, sort of like a group buy.

You can post now if interested, you can always change your mind, i just need to see the number of people that want in. >>

Remember, these are identical to the Injen style but at more than half the price!

Why not make a cold air intake?

The reason I havent made a cold air is because I cannot fabricate to a perfect fit like the short ram's.

My Celi was crashed before i bought it and the part of the body where the cold air would be passing through is mis-shaped so I could not guarantee a perfect fit like the short rams.

So inorder to make a cold air I would need a celi that is intact in that area.

Now, if you want a cold air that goes to the fender here is what I can do.

You can get the short ram now, then when I find a 6G that I can use I will try to make a seperate extension that connects to the S intake.
thats all i can think about for now

I already have one, but its a great idea man. I'm glad somebody finally started making these for the celi. Thanx for the effort. I will say that mine has been well worth the money. Keep up the work. >>

Thanks >>

Well when I got the Celi one of the first things I wanted to get for it was an intake.
So I was looking around and the Only one I found was the Injen for $230! >> >>

So now that I can I want to make them for the community so they don't pay for the overpriced Injen Intakes, which is what I almost did scince I found no other solution.

Just wait till u see the pics >>

I'm interested in purchasing one of these. I'm kind of new to cars and I've got a question. What is the difference between the "J" and the "S"?

Ok, the J is mis more like an L, I just say J because I like it more than the letter L >>

It's more simple, comes out of the throttle body to the right then it curves downward, toward the radiator. The filter ends next to the distributor cap.

The S is similar but it bends once more to the right so thatthe filter is where the old air box was located.

I would like to see an intake built for the 3s swap into a 6gc.. have looked for a long time for a CAI for it and no luck >>

Yea that's possible, but is the pipe chrome >>
and you still need a filter after that.
My kit comes complete so that it is a direct bolt on, all that is needed it the removal of the stock tube and the airbox, slap this puppy on, and your set >>

Opps, sorry noticed u were talking about the 3S, thought you were putting down my efforts >> >>

This post has been edited by 95celgt: Jan 29, 2004 - 10:40 PM

Neverstop, give me a pic of the engine bay, i'll see what i can do >>

Hey Spedtoe, what others are there?

This post has been edited by 95celgt: Jan 29, 2004 - 10:42 PM

-95celgt+Jan 29, 2004 - 8:41 PM

hey onc ei make mine cold air intake i would like to start making and selling them but im just havent gotten around to making mine yet.

im interested in this intake... lemme know I have a GT

i think it's a damn good idea. i'm down for the "s" type if it is mandrell bent, or the pipe isn't crimped. let me know.
adam

PRODUCTION IS READY TO BEGIN!

Final installation and fitting was done today!
Look for the new GROUP BUY topic!
I GOT PICS so u know what ur getting.

hey i would be interested in a CAI for the 3s swap. if you ever do manufacture some let me know. by the way, which part of s. texas are you from? i'm from s. texas also.

Hey R-O3
Well im from Laredo, on the border >>

If you gan get me a pic of your engine i will see if i can make them.

i went to the border this past weekend. not laredo, but i've been there before. i went to weslaco, then to las flores. i live about 30 mi. south of san antonio. i don't have the engine in my car yet, need a few parts before i drop it in. but i will send you pics and measurements once it's done. that won't be for a few weeks though.