6G96GT

#1

Here is the measurements guys. Does it look good? My mech said everything was within spec range but he also said tolerance is very wide for my engine (2.2 5sfe).

.

This post has been edited by 6G96GT: Jan 26, 2014 - 2:50 PM

Smaay

#2

thats the clearance in inches?

if so, those are all on the loose side. That wont be a problem but it will tap.

---

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac

6G96GT

#3

Ah, I can just get bigger shims right?

What if I don't though and just let it be as is?

Thanks for replying!

Tigawoods

#4

how is there just one clearance number for two different valves?

---

1995 GT::::Diffusing the Situationエキサイティングカーレーシングチーム!march2010 COTM:6GCfeature2014:january2015-2016-2018 COTM

6G96GT

#5

I guess they were the same measurements.

>

QUOTE (Smaay @ Jan 26, 2014 - 11:38 PM)

>thats the clearance in inches?

if so, those are all on the loose side. That wont be a problem but it will tap.

Do you know what the tolerances should be?

Smaay

#6

intake should be .007 to .011 and exhaust is .011 to .015

---

2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac

6G96GT

#7

Thanks again with the info. One more thing. I have colt cams installed. Does that make any difference on the clearances? Prolly not right?