As with the E-series gearbox install with 3SGTE conversion, the hybrid driveshaft (MR2 inner with ST185 outer) can some one tell me the type of longer bolt needed to use with a spacer please guys.
Hybrid driveshaft Bolts - 6G Celicas Forums
I went to a local fastener shop (they sell all kinds of bolts). I brought one of the stock hex bolts and they matched them up - pitch and diameter - and I bought some that were 10mm longer. They cost about $2 each IIRC.
Here's more info on the spacer, not much on the bolts.
http://www.6gc.net/forums/index.php?showtopic=32626
Here's more info on the spacer, not much on the bolts.
http://www.6gc.net/forums/index.php?showtopic=32626
my st205 swapandour Beams swap
Thanks Batman
Bolts are Socket Cap 12.9 High Tensile M10x1.5x90mm