Because I switched to an MR2 gearbox and so another clutch kit, I sell this one.
Its a Helix clutch kit, and is suitable for the S54 (ST202) tranny, in combination with a 3SGTE motor.
Not with a 3SGE!
20 splines, shaft 27mm thickness.
The clutch plate is custom made by Fensport UK.
I mean: the standard plates that are in the S54 tranny have a slightly smaller total diameter than that of the E56/E153/E154 tranny´s.
In other words, you lose some grip.
This clutch plate has the inner of the S54 tranny, but the plates of a E-type tranny!
So maximum grip!
Uprated Clutch cover with a torque capacity of 360 lb/ft.
The reason why I'm selling it, is because the E153 tranny is a lot stronger.
Removed after 5000kms (3100 miles).
New price was almost 700,- ($945,-)
Selling for $400,- shipped to the US
Its a Helix clutch kit, and is suitable for the S54 (ST202) tranny, in combination with a 3SGTE motor.
Not with a 3SGE!
20 splines, shaft 27mm thickness.
The clutch plate is custom made by Fensport UK.
I mean: the standard plates that are in the S54 tranny have a slightly smaller total diameter than that of the E56/E153/E154 tranny´s.
In other words, you lose some grip.
This clutch plate has the inner of the S54 tranny, but the plates of a E-type tranny!
So maximum grip!
Uprated Clutch cover with a torque capacity of 360 lb/ft.
The reason why I'm selling it, is because the E153 tranny is a lot stronger.
Removed after 5000kms (3100 miles).
New price was almost 700,- ($945,-)
Selling for $400,- shipped to the US