I am new here. I did quite a bit of searching, but can not find a definitive answer to this, so I thought I would ask.

I am using a Caldina 3SGTE, a E153 from a 99 V6 camry, MR2 LSD, MR2 inner driverside stub, and MR2 inner passenger intermediate shaft. I am using ST205 hubs and spindles, what axles do I use? I am guessing from a Camry? Just not sure what year or whatnot. If anyone can point me in the right direction, thanks!

ST185 outter axles, and this has been covered

any lexus es250 outters will work, easier to find in the junk yard rather than a st185, 1989-1993 es250 or 1989-1992 camry v6 outter axles will work

>

Excellent! This is what I was looking for. Now my last question about it, are the es250 or Camry V6 axles a better fit then the ST185 axles (passenger ST185 axle 1/2" too short)? If not, I am guessing the spacer made from an MR2 stub shaft would be needed.

i honestly used the entire axle from the es250 for my e56 trans swap

im using MR2/ST185 combo and no spacers needed

Gotta love Rockauto, two brand new axles heading my way for $110 shipped.

post the part number that you used please

>

SurTrack TO-8030

The description on Rockauto said 20 3/16" compressed length, as opposed to 20" with the ST185 part. I am not sure if that is just longer threads or what, but here are some pictures. They look pretty beefy and come with a seal, grease, nut, and keeper. Maybe someone an compare?