FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
watch this. when he starts to get into 5,800 rpm and gauges turn red so you can prepare to shift i think if you can replicate something like this then awesome
http://www.youtube.com/watch?v=cCDm1K6sCmk
This post has been edited by BonzaiCelica: May 8, 2014 - 8:07 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
>
QUOTE (BonzaiCelica @ May 8, 2014 - 9:04 PM)
>watch this. when he starts to get into 5,800 rpm and gauges turn red so you can prepare to shift i think if you can replicate something like this then awesome
http://www.youtube.com/watch?v=cCDm1K6sCmkFirst one of that style that I saw - would look cool
https://www.youtube.com/watch?v=k2K2c3QQgSA
SOLD :( 1997 ST204 Celica ZR ----->See it here on 6GC!2013 October Celica of the Month XDNow: '00 NB8B Mazda MX5 ----->See it here in off topic!
That's cool, I've thought about it, maybe in the future.
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Nice work on your products
>
QUOTE (playr158 @ May 15, 2014 - 2:09 PM)
>Nice work on your products
Thanks.
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Bezel for a 6GC.net member.
Before the tint
Left/right tinted
Tinted
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
>
QUOTE (ILoveMySilly97 @ Jun 2, 2014 - 6:08 PM)
>Awesome work!
Thank, Ken.
Another bezel for a 6GC member
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
You guessed it, another bezel. Tinted glass. Shipping to Cali :]
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
3L2 Toyota red. No tint. Going to a 6GC member.
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Nice work going on there. Really liking what you do.
>
QUOTE (BonzaiCelica @ May 8, 2014 - 3:04 PM)
>watch this. when he starts to get into 5,800 rpm and gauges turn red so you can prepare to shift i think if you can replicate something like this then awesome
http://www.youtube.com/watch?v=cCDm1K6sCmkthis wouldn't be that hard to set up actually, mounting a shift light inside the cluster. What would be cool though is having a dual filament 194 bulb behind the RPM cluster and using it as a shift light. I'm not sure if a 168/194 bulb exists that is dual filament, would need a different fixture to hold the bulb also. Or you could tie into the whole gauge cluster illumination circuit on either ground or positive since the circuit is isolated from the rest of the gauges. Install a flicker system to make the lights flash rapidly when ready to shift.
-Jay95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
>
QUOTE (yellowchinaman @ Jun 27, 2014 - 4:58 PM)
>Nice work going on there. Really liking what you do.
Thanks, Ray.
More pics. Recently did two bezels, one has white the other silver trim. Glossy inside the pods, the outside is satin. Pictures before tint.
This post has been edited by The_enD: Aug 10, 2014 - 12:48 PM
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Bezel for rentaspace
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Another custom bezel with the long pods. Customer wanted glossy inner part of the pods, tinted plexiglass, yellow rim.
>
QUOTE (955SFE @ Aug 28, 2014 - 7:07 AM)
>
Nice work. Hopefully i get the chance to buy a bezel soon.
*cough* rear diffuser* cough*
Thanks.
Diffusers are too big to ship. But I will make one for my GT-4 for sure.
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Glossy inner, tint, white rim
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
White LEDs and red needles are what I wanted to put but I wasn't sure how I'd get red needles. I was thinking of doing a red niteshade (for the tail lights) on just the needles and putting a white LED bulb behind it but wasn't sure how it'd turn out. Is there any way to get red needles with white LEDs for the numbers on the gauges?
"I'd rather lose by a mile because I built my own car than win by an inch because someone else built it for me"
You can try with putting red transparent film over the needles and using white LED replacement bulbs. It will be a 1 hour job tops.
It will be easier to place the film without removing the needles as you will have to recalibrate them afterwards. Just work slow and steady.
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
That's true, I didn't really think about that, I might just put a film on it that way I can stay away from having to recalibrate the speedo and the other gauges.
"I'd rather lose by a mile because I built my own car than win by an inch because someone else built it for me"
One more yellow, going to 6GC.net user KAOS in Canada.
Yellow rim, glossy inside, no tint. Long version.
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
>
QUOTE (The_enD @ Oct 9, 2014 - 7:38 AM)
>One more yellow, going to 6GC.net user KAOS in Canada.
Yellow rim, glossy inside, no tint. Long version.
Oh yeah!
Thanks Teo!
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
