>>>>***UPDATED INFO BOTTOM POST***>>>>

>>Send Me Your Light Unit: >>$55 Shipped US(+$10 to CAN/+$15 Everywhere Else) >>>>
For those of you who dont DD you car and can be without a high mount for a week or so, you can send me your unit and I will put a board in it and send it back to you (it will be plug and play).
***>>I need the whole light housing (dont need the mounting plate) along with the female connector that is attached to the bulb.
>>

>>Plug and Play Unit Sent To You/Buyback:>> $70 Shipped US(+$10 to CAN/+$15 Everywhere Else)>>/>>$15 rebate>>>>
I send you a complete Plug and Play unit to replace what you have ($70). For a rebate, send me your old unit after you install the new one and upon receiving your old unit, you will receive a $15 Paypal Rebate - this will help me to continue to make more units!
***>> For a full rebate I require the whole light housing/rubber seal/ female connector thats attached to the bulb. If you are concerned of the condition of the one you are sending back to me just PM me, I understand that the seal on the lens has a tendency to crack up and in some cases can be pretty bad.>>


>>>>******>>
PM to ORDER

To start off I would like to get a couple people who are willing to send me their stock units back.
I have a couple boards that need housings and that would help me get these out a little faster.
I only have 2 Plug and Play Units ready to ship so again, this will be a slow start.
>>******>>>>


How the LED Unit is made


video1 (i have a strobe on the light fyi, sorry for the phone quality)
http://vid35.photobucket.com/albums/d176/M...zpshyzez8tz.mp4

video2 (before install)
BEFORE INSTALL

Installed Unit
[color="#8B0000"][/color]

This post has been edited by Tigawoods: Apr 3, 2016 - 7:27 PM

Did you get around to tinkering with the flasher mod?

>

it's in his video link

>


Sorry, I DID see that after I posted - I then edited my post, but clearly didn't save my changes before navigating away from the page.

the one thats in my video is a unit I bought.
I looked into making one, just out of curiousity, and also thought I could include it in the LED unit, but its a little too much work for how much you can get some of these units for. It would take me longer to make a flasher unit than the actual LED Unit

First LED Unit goes to KAOS!

You still have any of these laying around?

Yup! I have 2 left.
I dont have any plans to make anymore so I can let this one go for $55 shipped.

Trying to get the clear brake lense. Who has one!

>


Here's a few I made earlier......





Still making them to order, lead time 2 days, price £27.50 GBP + £4.20 to cover standard Air Mail. Clear front lenses for the ST205 also available.

P.M me for PayPal payment details

>
Then id have to wire one up from scratch then because the LED's I use are white (no point in using less bright red LEDs in a red housing)

might take one off your hands, will know in a couple of days.

Oh shoot okay

pm'd

>

Sorry, no P.M received

>
It was for me haha

Tigawoods. I may be interested in a set. I will let you know in a couple of days.

>


>
I have one left now.


>>>>***UPDATE***>>>>

These are no longer "plug and play" I dont have anymore OEM plugs so I am supplying crimp on connectors with the units (I crimp on the connectors to the unit all that needs to be done is to cut the plug off the OEM wire, strip the wire and crimp on the supplied connectors.)
I suggest cutting a few inches away from the OEM plug just incase you want to go back to the old light and have enough wire to re-attach the plug.

I have JUST and I mean like a day before this post was bumped back up redid the wiring (out of curiosity and boredom) to have a higher light output. I didnt expect to have a resurgence of interest all of a sudden. I havent extensively tested the units with the higher light output so I cant speak for the life of the LEDs but it should be safe for how intermittently the light is used.

I am reserving the last unit for someone who is willing to give their OEM light back to me so that I can make another unit.

I have enough LEDs to make 2 or 3 more units and after that I probably wont make any more

This post has been edited by Tigawoods: Apr 3, 2016 - 7:28 PM