So after days of searching and what I thought was correct wiring I have no power to fogs. I'm trying to install ffogs from a 97 GT into a 95GT.
I have not had any luck finding the factory wiring diagram. I'm putting them in my wife's celica and want them to work with the combo switch I already have it re wired and working correctly. Just no power to the fogs. Please help

i can scan the page here. but use this in the mean time..

http://www.6gc.net/forums/index.php?showtopic=38656

>
I read that one a couple of times. Here is what I've done
I ran the green/black from combo to top of relay.
Blue/red from left of relay to fuse panel.
Red/white from right of relay to Junction that goes through the firewall
Solid red with single grey stamp also goes to Junction through the firewall

The red/white and solid red are what are getting me. What exactly are these going to? Kind of hard to explainbbecauseI ddidn't pull the wires in the order I installed them and there was about a week of time between pulling them and trying to put them back. The interior wiring was done pull a wire and put it where it goes so I'm pretty sure those are all right. It's just I'm lost on what is going out.

best i could do with camera. should guide you... faily simple

That actually helps a lot my biggest issue was that solid red it goes from one silver striptto a double silver when it ties into the headlight. I'll try again tomorrow and post my findings.
Thanks a ton

ive been looking for the pdf version of the book for a while..

>
What'stthe name I'll see if I can hel. LLooks like a lot of useful information there

Mission successful! Just need to figure out where I want to run the power wire (solid red) permanently

in the diagram, to the 15 amps fuse from headlight..

>
I ran it to the battery. Either way if they aren't turned they stay on.

here you go

https://share.acrobat.com/adc/document.do?d...4a-56ed1b61eaa6



download it, its for a 95, but it will be deleted on jan 15