Just got everything back together after doing the manual swap to my 95. Hooked up the battery and tried to fire it up.... no luck. Car cranks over just fine, but will not start. I did switch the ecu with the manual ecu out of a 99 gt. Don't know if that would have anything to do with it or not. It just plugged right in. Can't think of why it won't start. Anyone have any ideas????
Car won't start after manual swap!! - 6G Celicas Forums
Are you not getting fuel or spark? There's a circuit opening relay on the side of the ECU. Try swapping that out with the old COR. However, I'd put my money on it being the crank position sensor. The '99 Celica uses a crankshaft position sensor that your '95 won't have.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
If it is the crank position sensor, how would I fix that issue? Just swap the ecu back?
QUOTE (richee3 @ Aug 29, 2015 - 4:50 PM) 
>Are you not getting fuel or spark? There's a circuit opening relay on the side of the ECU. Try swapping that out with the old COR. However, I'd put my money on it being the crank position sensor. The '99 Celica uses a crankshaft position sensor that your '95 won't have.
If it is the crank position sensor, how would I fix that issue? Just swap the ecu back?
Try the 95 ecu and it should still start. And richie is right, 99 models use a crank angle sensor, 95 do not, they run off the dizzy only. So if ur using a 99 ecu, it relies on the crank angle sensor for the engine to fire ignition, it wont spark without the sensor basically
>
Switch the ecu back. Started right up!! So I'll be fine just leaving in my original ecu then?
QUOTE (mi645 @ Aug 30, 2015 - 1:21 AM)
>Try the 95 ecu and it should still start. And richie is right, 99 models use a crank angle sensor, 95 do not, they run off the dizzy only. So if ur using a 99 ecu, it relies on the crank angle sensor for the engine to fire ignition, it wont spark without the sensor basically
Switch the ecu back. Started right up!! So I'll be fine just leaving in my original ecu then?
it will run the car fine, but you will get a CEL for auto codes. look for a 95 MT ECU.
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
>
Awesome, glad you got it started that easily!
QUOTE (JohnnyGat0519 @ Aug 30, 2015 - 7:08 AM)
>Switch the ecu back. Started right up!! So I'll be fine just leaving in my original ecu then?
Awesome, glad you got it started that easily!
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
No CEL yet. But the o/d off light flashes
This post has been edited by JohnnyGat0519: Aug 30, 2015 - 5:23 PM
QUOTE (Smaay @ Aug 30, 2015 - 11:05 AM)
>it will run the car fine, but you will get a CEL for auto codes. look for a 95 MT ECU.
No CEL yet. But the o/d off light flashes
This post has been edited by JohnnyGat0519: Aug 30, 2015 - 5:23 PM
Just drive it. 
enjoy it
enjoy it
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.