bloodMoney

#1

WE ARE LOCKED IN! AUG. 13th @ NOON

Location: Starved Rock State Park, Lone Point shelter off of rt. 71. For any newcomers, please note that the shelter is not actually located inside Starved Rock State Park.

GPS coordinates: 41.31084, -88.939776

https://www.google.com/maps/@41.31084,-88.9...#33;3m1!1e3



What's it looking like guys? Sometime in July?

Discuss.



This post has been edited by bloodMoney: Jul 18, 2016 - 10:34 AM

---

~bloodMoney

cheela

#2

early and mid July will work for me. Towards the end of July I will be busy moving my celicas into my new home.

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

4-eyed-freek

#3

Im good for July as long as its not the 9/10th (EDIT!! had my weekends wrong!)

July 16th would be the only weekend I could make it.

This post has been edited by 4-eyed-freek: Jun 6, 2016 - 10:37 PM

---

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16

enderswift

#4

I say July 9th

narly_charley

#5

I'm off on the weekends, so I'll try to make whatever work. c:

---

2000 GT-S 6 SPD...SOLD!

narly_charley

#6

Figured I'd share my continuing wheel Corolla wheel bearing story with you guys. A month ago I put my FOURTH wheel bearing (put an OEM bearing and hub in). This one has my father and I scratching our heads... We've checked bad grounds already. We're going to replace the bearing for the fifth time and put a ground from the battery to the starter bolt... It's funny, my dad's been a tech for 32 years and he's never seen a car eat bearings like this...

---

2000 GT-S 6 SPD...SOLD!

bloodMoney

#7

Joe, what does the ground have to do with wheel bearings?

Also, if you are going through them so frequently, are you looking for other problems in an attempt to correct? A few off the top of my head are bad CV, wheel out of balance, deformed knuckle?

---

~bloodMoney

richee3

#8

A bad ground could let current flow through the bearing and cause pitting.

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

njccmd2002

#9

I would get rid of corolla

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

narly_charley

#10

I've thought about putting it into a ditch. Haha! Not really. It's in VERY good shape for 190,000 miles.

We replaced the bad ground the third time we've done it. The second bearing we changed we figured we got a bad one during the second swap. Once the third bearing went bad, we replaced the hub and bearing with good aftermarkets. We also replaced the bad ground from the body to the trans (it was literally chewed on by a mouse).

That one went bad and we figured that the hub and bearing were the issue, but far fetched. We then replaced them with a Toyota bearing and hub, and it just went bad the other day, like overnight. CV is good. The wheel is true and balanced. The knuckle being warped is unlikely, but not out of the question.

I'm going to swap the bearing out again with an OEM and put a ground from the starter to the battery. Like Daniel said, it happens... The way it got loud overnight made me think that is in fact electrical... When cranking, the arc is going across the ball bearings...

---

2000 GT-S 6 SPD...SOLD!

Bitter

#11

Just get a knee assembly from a junk yard. If you're still blowing through bearings then I dunno wtf to tell you. Maybe take the bad one apart to do a necropsy.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

narly_charley

#12

>

QUOTE (Bitter @ Jun 8, 2016 - 9:12 PM)

>Just get a knee assembly from a junk yard. If you're still blowing through bearings then I dunno wtf to tell you. Maybe take the bad one apart to do a necropsy.

Are you just as confused as I am?

---

2000 GT-S 6 SPD...SOLD!

sixgentoyota

#13

Only July date we can do is 30th as of right now. August though is wide open..

narly_charley

#14

I questioned Chris about where he got his big pack of microfiber towels from. He said he gets his at Sams Club. I go to Costco and I looked there and bought a big 36 pack of them, they are amazing. So... If anyone needs microfibers and they have a Costco membership (or Sams), get them there. c:

---

2000 GT-S 6 SPD...SOLD!

bloodMoney

#15

Told you....

---

~bloodMoney

bloodMoney

#16

So, what are the dates we have?

7/9 - No Skyler, No Jake/Sammy
7/16 - No Jake/Sammy
7/23 - No Skyler
7/30 - No Skyler, No Chee

Am I tracking this right?

Speak up people!

---

~bloodMoney

richee3

#17

We're out for the 16th as well.

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

4-eyed-freek

#18

>

QUOTE (bloodMoney @ Jun 16, 2016 - 10:50 AM)

>So, what are the dates we have?

7/9 - No Skyler, No Jake/Sammy
7/16 - No Jake/Sammy
7/23 - No Skyler
7/30 - No Skyler, No Chee

Am I tracking this right?

Speak up people!

7/9 - No Skyler, No Jake/Sammy ( im def out this date)
7/16 - No Jake/Sammy
7/23 - No Skyler (most likely can pull some strings and make this work)
7/30 - No Skyler, No Chee (most likely make this work too)

How about august???

---

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16

cheela

#19

First weekend of august can't do. But the rest should be free.

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

Bitter

#20

I can only do the dates that other people cannot do.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

bloodMoney

#21

OK.

Let's break into August. What does the second weekend look like?

8/13?

---

~bloodMoney

Bitter

#22

I'm available as long as someone else isn't available, if everyone is available then I'm not available.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

TimeslideZ

#23

I'm out 3rd week of July and 1st week of Aug, any other time I should be open to at least swing by or something

4-eyed-freek

#24

August 13th works for me!

---

It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.Celica: The name is derived from the Spanish word for "heavenly" or "celestial".Back-2-Back July COTM 15&16

Bitter

#25

Then I'm out for the 13th.



Just kidding.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

bloodMoney

#26

Ok.

Who else would be in for 8/13?

---

~bloodMoney

enderswift

#27

>

QUOTE (bloodMoney @ Jun 20, 2016 - 12:16 PM)

>Ok.

Who else would be in for 8/13?

I'm in

cheela

#28

I can make it.

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

sixgentoyota

#29

In for 8/13

narly_charley

#30

I'm down. Also, I picked up a 2003 silver Vibe that I will be replacing the Rolla with. c:

---

2000 GT-S 6 SPD...SOLD!