I got 2 questions for you guys. First is, is it possible to make a 6-speed trans. with a 6th gen celica motors? And the second question is, is the tubing for the Exhaust differ from the JDM? (Meaning, is it possible to put a JDM exhaust on a USDM celica perfectly?)

anybody?

Exhaust I dont know, but the other try a search this has been covered many times, yes you can, its probobly not worth it, you can get a 6 speed trany off a jdm motor, or get an expensive trany shop to add one in for much more then your tranys worth.

any cat back exhaust not made for a GT4 will work on the USDM celica's with little to no modification.

so i can put a Fujitsubo or 5Zigen or A'pexi exhaust? will it just hang on there or will it be a tight fit?

i dont know if the exhaust would fit well cuz they are for the 3s engines and i doubt yours is. you could try it but it would probably be a little different.
DREW

You can find a 6 speed tranny that will fit the celica motors but it might not be worth it if you dont have a high powered motor. If you dont have enough power to push that thing to the limits then there really is no point on having it.

What kind of Exhaust do you guys prefer? And do you know any sites that sell celica exhausts?

-Shigexile+Feb 28, 2004 - 7:28 PM

Yeh, like I said, and Kwansa said, Any exhaust not made for the GT4 (st205) will work. It dosnt matter if it was for the celica's with the 3S-GE because its called cat back ebhaust for a reason. Its from the catalytic conveter back, and the only thing that changes the position of the CAT is the AWD on the ST205. So any exhaust made for the AT200 ST202, ST203, ST204, hell maybe even the exhausts made for the ST206 will fit, but importing these exhausts would be a waste in a way because you can just get mandrel bent piping installed for around $300 and buy any companies muffler.

any sites i can go to?

-Shigexile+Feb 29, 2004 - 3:47 AM

How about an exhaust for a ST185?

nope different setup wrong gen.