Over 1M Posts • 84K Topics • 9K Authors

7afte - 6G Celicas Forums

Topic #9988 16 posts Started by zipstrips
are u sure.. seems pretty high?

Visit My Automotive & Tech Blog.
That's a VERY VERY modified 7AFTE. Look at the redline....;] It's probably also running some fairly agressive cams because the powerband from typical 7AFE's has been shifted very high. The torque peak on normal 7AFE's and modestly boosted 7AFE's usually happens at around 2500-3000 rpms. This one has shifted the low-end to between 4-4.5k (more like the 5SFE... might be overbored and/or stroked). Anyways... pretty sweet.

"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
that guy owns a tuner shop (wherever he lives)... he has like over $8,000 in the motor on it..... he talks somewhere about everything he's done
Wow. All I can say is "I told ya so!"
-SpedToe169+Mar 1, 2004 - 7:52 AM

-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
that guy has bored it over to 2.0L.... redone everything internally, and is shooting for the 500 marker
Yea but theres probably not ONE stock part in that motor....hell if you throw enough money at a Geo Metro they'll move too.
i agree with SpedToe...

it's more fun to build up an engine not many have done before..

[TeamNJCT
-BigEdge169+Mar 1, 2004 - 11:41 PM
hey , reading his forsale post in the corolla site,, its the same thing that happened to me, the 3rd piston/bearing is shot.