Interior/Audio/Electrical/Wiring
7,599
Total Topics
25
Showing
23
Page 23 of 304
Topics in Interior/Audio/Electrical/Wiring •
newest topics first
As far as I remember, lock/unlock wires are located behind the kick panel under the steering wheel. (
cheat sheet
)...
5mm(if that is what you are working with) LEDs won't fit very nicely in the climate control, too big for that. I bought SMD LEDs for mine.
I used 1 SM...
As for the button console, it has hook on top side and metal clip on bottom, and by the looks of it, I'd say that the bottom is not clipped (just push...
Any ideas guys? I wanna have all four headlights on all the time without blinding folks. is there a way to do a kinda drl setup for the highs so they...
As long as your alternator is healthy you should be ok. May want to consider the use of a capacitor to help as well....
I leave them off and then turn them on when I need them. The way around this is to get the capacitor set up and install it with the hid's. It's just e...
Batman you are my saving grace, but what if I can't read schematics....
Canbus have more LED's therefore a more even distribution of the voltage to the LED's. In order to keep the LED's from blowing you have to wire in re...
Indicator for heading, sweet....
HELP! Actuator is not functioning and the door is stuck shut.
How the HELL.. do you get the door open?...
what can be the problem here? i put a use engine in, drove the whole day with no problem. I decided to wash the car, after that, i took it for a spin ...
I haven't taken an in depth look into it. If I had to guess you'd have a half for the front and a half for the back and run your stitching in the mid...
Hey guys,
I'm going to be swapping to LEDs soon with my gauge lights and I'm wondering if the a/c controls are also the 194 bulbs or if they are the r...
Any reason why you want that? Wouldn't it be more usable to have then turn on when the doors opened? Just having them on when you are driving would pr...
http://www.toyotapartsoverstock.com/produc...ukey_category=0
When I removed mine, I pried millimeter by millimeter at opposing ends, came off decently...
Actually the projectors uses h1 for the lo beam. Either get a 9006/hb4 ballast and a h1 bulb or make an adapater....
first thing that comes to mind is your car is a post-facelift 97 and it has the pre-facelift two-post spoiler. Take off your trunk plastic and make su...
From what I'm gathering you probably need to replace the alternator....
Hey guys,
I have a friend of mine that wants me to help them with their car audio install. They want to put 6x9s in their parcel tray, and have told m...
+1 on the seat belt warning. I took my seat out today and forgot about the cable.... felt the tug just soon enough before I ripped it out of the car t...
~ Reserved for future additions to guide ~
This post has been edited by
JoshuaM
: Jul 24, 2013 - 10:28 AM...
I cant find where to drill threw to get the power cable in
This post has been edited by
StealtOnyx
: Jul 23, 2013 - 12:10 AM...
http://www.6gc.net/howto/install_s2000_antenna...
1) The cushion itself is held by the fabric, which is held by different types of pins and plastic hooks. Maybe your pins rusted out and broke.
3) Remo...