Engine/Transmission/Maintenance
14,249
Total Topics
25
Showing
31
Page 31 of 570
Topics in Engine/Transmission/Maintenance •
newest topics first
I know its been done but its got to be a real nightmare trying to fit a transfer case and rear header all back there. I know the steering rack is lowe...
give the car a tune up for the sputtering, and it sounds like your syncros are going out on the trans....
anything useful for 3d gen 3sge?...
any blue boxes you could fill out with ruff measurements would help...
So far, I've found this list to be accurate. Feel free to chime in with corrections if you see anything wrong!
1 Normal Condition.
2 Air Flow Meter si...
hard to say where the oil could be coming from, oil pump, head gasket, crank seal, cam seal....
Does it stop bouncing once it's fully warmed? Does it bounce worse once fully warmed?...
car-part.com...
After installing an aftermarket ecu i get random misfires. No particular rpm or load. The ecu-settings is correct, so it has to be something else. How...
i should be ordering a beams engine this thursday...does anyone know if it has its own individual throttle cable or could i substitute with a differen...
at least partially refund your money. or make a deal. that is not TRd, nor is worth that much.... he was selling a TRD, and misrepresented. ignora...
Does anyone know where the VSV is located on the beams 3sge?
-Chris...
A warer pump for intercooler. Like a bosch maybe? The problem would be ther thermostat. If it closes it wont flow.. You may need a secondary circu...
I have a 96 Celica st Auto and my engine has bad piston rings and i would rather just swap out the motor instead, What is a good motor that would bolt...
540cc if I'm not mistaken....
Also some states only require one cat to be present. I'd say go for it. I put an obx eBay header and a weapon r intake on the wife's corolla
Also a 7...
he also has a Jap spec ECU. they dont have ODB like USDM...
I've been doing some looking and most of the sites for a 3sgte seem shady. Any personal experiences dealing with this stuff? Can anybody recommend a s...
Anyone have a nice 5sfe trans?...
also if you live in a dusty area it never hurts to take a hose and clean the coils for the radiator, condenser, and you intercooler sits in front of a...
Having a look, it doesn't appear you can order the (right angle) crank breather separately, you have to buy the whole first part of the manifold, as i...
problem solved
This post has been edited by
skogs
: Sep 15, 2014 - 8:06 AM...
Really would like some input on this. Does anyone have a answer?...
I only had a front mount insert at that point. I can't imagine having both at once to break in. I knows there would be some vibrations and the inserts...