P5ycho

#31

>

QUOTE

>HOLY ****! I'll bet you lost all the hp gains b/c of the extra weight of those + the power they use for the pretty lights. lol jk ... pretty impressive really.

hehe , i'd take you out for a blast were you in the uk....
i am quite paranoid bou any damage happenin under the hood, hence all the gauges.. but weight aint an issue as i am not competeing in official sports etc...lol
hence why the leathers and full interior etc...
i'm happy with the 330bhp its runnin plenty quick enough for me...
and if i can give a bmw m6 a run for his money its plenty power,,,,lol

6strngs

#32

installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.



If you ever figure out what to cover up the little empty space with, let me know.

This post has been edited by 6strngs: Apr 14, 2007 - 1:31 AM

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

sugarfree

#33

Whats the gains on using one of these on a Beams motor?

hurley97

#34

>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.

If you ever figure out what to cover up the little empty space with, let me know.

I know, I was very pleasantly surprised how well they worked


we cut out a piece of plastic to go there but it was close to impossible to fit it properly and make it stay flush with the center console trim in place... unless I were to glue it directly to the back of the trim piece, but I wanted something a little less permanent. I'll think of something soon, meanwhile you do the same and let me know if you come up with something

---

7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06

6strngs

#35

>

QUOTE(hurley97 @ Apr 14, 2007 - 11:27 PM) [snapback]546854[/snapback]

>
>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.

If you ever figure out what to cover up the little empty space with, let me know.

I know, I was very pleasantly surprised how well they worked


we cut out a piece of plastic to go there but it was close to impossible to fit it properly and make it stay flush with the center console trim in place... unless I were to glue it directly to the back of the trim piece, but I wanted something a little less permanent. I'll think of something soon, meanwhile you do the same and let me know if you come up with something

my friend suggested I put a piece of clear plastic there and then stick a blue LED light behind. lol.

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

hurley97

#36

haha... uhm... keep thinking

---

7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06

Batman722

#37

>

QUOTE(hurley97 @ Feb 26, 2007 - 5:05 PM) [snapback]530516[/snapback]

>

>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.

looks familiar

---

my st205 swapandour Beams swap

6strngs

#38

>

QUOTE(Batman722 @ Apr 15, 2007 - 9:26 PM) [snapback]547126[/snapback]

>
>

QUOTE(hurley97 @ Feb 26, 2007 - 5:05 PM) [snapback]530516[/snapback]

>
[img]

>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.
[img]

looks familiar

haha. yeah, I got the idea from this thread. I just didn't know it would be so easy! just plain old 3" L-brackets and a couple nuts and bolts.

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

nonsgard

#39

How would you Wire up a Aem UEgo wideband to a apexi neo with a 7afe

nonsgard

#40

How would you Wire up a Aem UEgo wideband to a apexi neo with a 7afe

Bigmeanbulldog55

#41

If you had a wideband O2, you could want to tune a NA car to something like 12:1 all the way across right? Same thing with a turbo car but just more risky? A buddy of mine has been messing with his SAFC2 in his sr20det 240sx, and I just thought it might be a good idea to help him out before he screws the motor up. God bless that guy, he'll spend $300 on a SAFC2, and run with a broken power steering pump, broken brake booster, broken a/c, a leaky radiator, and he will still talk of his next investment to be an equal length up-pipe.

---

Live Free, Be Happy

6strngs

#42

so what's a good wideband o2 gauge to get?

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

lagos

#43

>

QUOTE(6strngs @ Feb 27, 2007 - 11:49 PM) [snapback]531109[/snapback]

>
so what's a good wideband o2 gauge to get?

any of them. i have the aem uego and i love it.

---

15PSI - 30MPG - Megasquirt Tuned

hurley97

#44

I like that one, the AEM Gauge-Type Wideband UEGO Controller (I think you're talking about the same one). its actually the cheapest on ebay out of the package deals that come with everything



This post has been edited by hurley97: Feb 28, 2007 - 8:39 AM

---

7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06

Consynx

#45

i need a 60mm gauge
if you buy that and tune, u should sell it to me after you get u're tune done

btw, turbos generally aim for ~11-11.5 if driven a lot.

Negative

#46

>

QUOTE(hurley97 @ Feb 28, 2007 - 1:36 PM) [snapback]531200[/snapback]

>
I like that one, the AEM Gauge-Type Wideband UEGO Controller (I think you're talking about the same one). its actually the cheapest on ebay out of the package deals that come with everything

How much was that?

lagos

#47

>

QUOTE(hurley97 @ Feb 28, 2007 - 8:36 AM) [snapback]531200[/snapback]

>
I like that one, the AEM Gauge-Type Wideband UEGO Controller (I think you're talking about the same one). its actually the cheapest on ebay out of the package deals that come with everything

thats the one i have. ... it works great. however, in your case, i would just pay the 50bucks for dyno time and do all your tuning there. on a stock NA 7afe, you dont really have to monitor things at all times like you would on a turbo car.

---

15PSI - 30MPG - Megasquirt Tuned

Bigmeanbulldog55

#48

>

QUOTE(lagos @ Feb 28, 2007 - 2:54 PM) [snapback]531339[/snapback]

>
thats the one i have. ... it works great. however, in your case, i would just pay the 50bucks for dyno time and do all your tuning there. on a stock NA 7afe, you dont really have to monitor things at all times like you would on a turbo car.

I disagree. It never hurts to monitor everything. I would put a gauge on everything I could if I had the money and space on the dash. I don't trust the "idiot" lights. And gauges are really good tools for finding out what's wrong with a car when they break. Besides that, turbo or NA, it doesn’t matter. You’ll have problems in both. Turbo is just more prone to things because there is more stress on the motor from the forced air and most turbo cars and driven hard. But if you’re going to drive your NA Celica hard, get the tool to monitor it constantly. If you don’t, you’ll wish you had.

---

Live Free, Be Happy

cjh4l22

#49

>

QUOTE(P5ycho @ Feb 27, 2007 - 4:57 AM) [snapback]530785[/snapback]

>
>

QUOTE

>so how much did you pay for a cool light show in the car?!

Haha still a amature..lol
(sorry not meant to sound offensive)
light show ey????
how bout a visit to the starship enerprise????

HOLY ****! I'll bet you lost all the hp gains b/c of the extra weight of those + the power they use for the pretty lights. lol jk ... pretty impressive really.

---

proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]309,000 miles n' ....dead-> ALIVE AGAIN!! ~14,000 miles driven

hurley97

#50

>

QUOTE(lagos @ Feb 28, 2007 - 2:54 PM) [snapback]531339[/snapback]

>
thats the one i have. ... it works great. however, in your case, i would just pay the 50bucks for dyno time and do all your tuning there. on a stock NA 7afe, you dont really have to monitor things at all times like you would on a turbo car.

I know. I'll eventually need the gauge anyway, but because its not necessary right now I'm trying to hold off on it as long as possible

---

7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06

P5ycho

#51

>

QUOTE

>HOLY ****! I'll bet you lost all the hp gains b/c of the extra weight of those + the power they use for the pretty lights. lol jk ... pretty impressive really.

hehe , i'd take you out for a blast were you in the uk....
i am quite paranoid bou any damage happenin under the hood, hence all the gauges.. but weight aint an issue as i am not competeing in official sports etc...lol
hence why the leathers and full interior etc...
i'm happy with the 330bhp its runnin plenty quick enough for me...
and if i can give a bmw m6 a run for his money its plenty power,,,,lol

6strngs

#52

installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.



If you ever figure out what to cover up the little empty space with, let me know.

This post has been edited by 6strngs: Apr 14, 2007 - 1:31 AM

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

sugarfree

#53

Whats the gains on using one of these on a Beams motor?

hurley97

#54

>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.

If you ever figure out what to cover up the little empty space with, let me know.

I know, I was very pleasantly surprised how well they worked


we cut out a piece of plastic to go there but it was close to impossible to fit it properly and make it stay flush with the center console trim in place... unless I were to glue it directly to the back of the trim piece, but I wanted something a little less permanent. I'll think of something soon, meanwhile you do the same and let me know if you come up with something

---

7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06

6strngs

#55

>

QUOTE(hurley97 @ Apr 14, 2007 - 11:27 PM) [snapback]546854[/snapback]

>
>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.

If you ever figure out what to cover up the little empty space with, let me know.

I know, I was very pleasantly surprised how well they worked


we cut out a piece of plastic to go there but it was close to impossible to fit it properly and make it stay flush with the center console trim in place... unless I were to glue it directly to the back of the trim piece, but I wanted something a little less permanent. I'll think of something soon, meanwhile you do the same and let me know if you come up with something

my friend suggested I put a piece of clear plastic there and then stick a blue LED light behind. lol.

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

hurley97

#56

haha... uhm... keep thinking

---

7A-FTE:It's not about the money.Our Beams Swap.I <3 Dustin---07/16/06

Batman722

#57

>

QUOTE(hurley97 @ Feb 26, 2007 - 5:05 PM) [snapback]530516[/snapback]

>

>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.

looks familiar

---

my st205 swapandour Beams swap

6strngs

#58

>

QUOTE(Batman722 @ Apr 15, 2007 - 9:26 PM) [snapback]547126[/snapback]

>
>

QUOTE(hurley97 @ Feb 26, 2007 - 5:05 PM) [snapback]530516[/snapback]

>
[img]

>

QUOTE(6strngs @ Apr 14, 2007 - 2:30 AM) [snapback]546642[/snapback]

>
installed mine properly today. kinda amazing how the holes on some generic L-brackets from Lowe's line up perfectly with two of the holes on the stock CD-player bracket.
[img]

looks familiar

haha. yeah, I got the idea from this thread. I just didn't know it would be so easy! just plain old 3" L-brackets and a couple nuts and bolts.

---

94 GT - Sold -------- 69 Pontiac Lemans - Sold88 Alltrac - Sold ---- 04 WRX - Sold00 GT-S - Sold ------ 91 Miata - project/drift car95 GT - Sold -------- 96 GT - New Daily Drive

nonsgard

#59

How would you Wire up a Aem UEgo wideband to a apexi neo with a 7afe

nonsgard

#60

How would you Wire up a Aem UEgo wideband to a apexi neo with a 7afe