So I saw an eclipse today who flat blacked his tail lights, signals, etc. I don't think the light will get through the flat black paint well enough, but has anybody tried that tint stuff on them?
Blacked out signals - 6G Celicas Forums
I used the spray tint stuff on my side markers and turn signals. I am going to have to redo it soon because it is starting to flake off. I suppose more clear next time 
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
>
where did you get it at???
the lights seem to shine through fine on the cars that ive seen with it.
QUOTE(95CelicaST @ Mar 30, 2007 - 10:18 AM) [snapback]541348[/snapback]
>
I used the spray tint stuff on my side markers and turn signals. I am going to have to redo it soon because it is starting to flake off. I suppose more clear next time
I used the spray tint stuff on my side markers and turn signals. I am going to have to redo it soon because it is starting to flake off. I suppose more clear next time
where did you get it at???
the lights seem to shine through fine on the cars that ive seen with it.
Yeah light will shine through it. It would be illegal if it didn't. Look at the pictures in my profile. One of them you can see that they are black, and the night picture you can see the turn signals. I don't recall where I got them, but I am going to strip all the crap off of them and when I have my front bumper repainted I am going to have them spray my turn signals with a light layer of the black and clearcoat them.
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
I used the smoked-out vinyl tint from r-vinyls. Check in my profile or look in the flashbacks thread in the General Discussions.
use TESTORS transparent black paint for yoru plastics.....worked great!!!!..
maybe walmart has em...if not, order em from ebay/testors website
maybe walmart has em...if not, order em from ebay/testors website
Awesome! Thanks for the replies, I'll check out Testors and r-vinyls!
also, look up VHT nite-shades. see my profile for pics of the effects...lights are 100% visible when lit.
do you know who i am, mr. worley?
I looked for all three, the VHT looks like it's the best bet for this application. It's only $20 for a can on eBay, so I may get it off of there. How many cans for the four markers and two tails you think? Also which can is the one you used uberschall?
edit: btw will this stuff chip like 95CelicaST said his did? Should I clear ontop of it?
This post has been edited by phokur: Mar 30, 2007 - 9:46 PM
edit: btw will this stuff chip like 95CelicaST said his did? Should I clear ontop of it?
This post has been edited by phokur: Mar 30, 2007 - 9:46 PM
Well its not "chipping", its more "cracking" right above where the bulb is. It hasn't flaked off or anything, but make sure you put a bit of clear on it. I only did 1-2 layers, but then again that was back in the beginning of 2005..
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
Tried this stuff on my headlights and it startd to crack... O_O, but on the tail lights it looks really sexy. If you mess up use gas, it takes the paint off without doing too much harm to the clear coat of your car.
.. you should probably remove the signals and such from the car before you start painting, especially if you need to dump gas on it..
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
done all mine on most of my cars, love the look!
My Celica Is Now For Sale
I used VHT Nite Shades with great success on mine. Light comes through still. Use it until you're happy with the shade.
Sometimes we live to beat the odds.-Ryanaim: rkgreen04
heres a pic of mine. well if you smoke out your tail lights make sure you DO put clear coat on top. you could get acrylic clear coat at any PEARL paint shop thats where i got mine. as for VHT Nite Shade you could pick that up at a car shop or autozone or something. and if you do decide to smoke it heres a tip.. if you want to make it look darker dont keep on spraying.. spray one layer, let it dry, once its fully dry, add another layer and so forth.. have fun
That's hawt! Did you remove the tails to do that? The front signals look easy to remove so I'll definitely do those, but the tails look like a possible pita.
^the tails are extremely easy to remove, when you open the hatch, on the back there are 6 "plugs" with little light bulbs on them (3 on each side) pop those off, then get a 10mm socket and take the nuts off and the tails will fall right out.
Oh cool, I may have to then... how about the third brake light in the hatch?
>
i havent tried to get it out before, but it looks like it might be pretty tough.
QUOTE(phokur @ Apr 3, 2007 - 9:27 PM) [snapback]542852[/snapback]
>
Oh cool, I may have to then... how about the third brake light in the hatch?
Oh cool, I may have to then... how about the third brake light in the hatch?
i havent tried to get it out before, but it looks like it might be pretty tough.
yeah i took out the tail lights to do them.. make sure you get newspaper and put them underneath that.. remember also the advice in my other post lol
do they have red paint too, i have seen all red tails before. or is that just tint film? i think on my car id like red more.
anyone have pics of smoked or red tails on a red celi?
sorry it took a couple days...i used nite-shades...the stuff in the purple can. i got it off ebay too. 
the two most important things for painting the tail lights are cleaning thoroughly before applying anything and clearcoating afterwards. i use rubbing alcohol to clean off plastic parts before painting. you'll probably also want to tape off the sides and back of the light buckets so you don't get paint on them.
i blacked out my third brake light, it's kind of a pain to get out. you have to remove the panel at the bottom of the hatch and unbolt it from the inside. it looks pretty good (i haven't gotten a picture of it yet, tho).
good luck, and any other questions...just ask!
the two most important things for painting the tail lights are cleaning thoroughly before applying anything and clearcoating afterwards. i use rubbing alcohol to clean off plastic parts before painting. you'll probably also want to tape off the sides and back of the light buckets so you don't get paint on them.
i blacked out my third brake light, it's kind of a pain to get out. you have to remove the panel at the bottom of the hatch and unbolt it from the inside. it looks pretty good (i haven't gotten a picture of it yet, tho).
good luck, and any other questions...just ask!
do you know who i am, mr. worley?
go to a sign shop and buy translucent black vinyl, wrap it around your tails and heat it on the edges.
yeah they have translucent red spray for tail lights.
http://cgi.ebay.com/ebaymotors/JDM-RED-TIN...sspagenameZWDVW
http://cgi.ebay.com/ebaymotors/JDM-RED-TIN...sspagenameZWDVW
Went to autozone today and they didn't have any. So I'll have to buy it off of eBay, I think one can should do the rear tails and markers. Also for clear coat, can I use any Acrylic Laquor? I work at a Harley shop so I can get it for somewhat cheap. How many coats of clear do you think?
I really like the look of netrata's car. I suppose the vinyls would ensure a even coat. I can't find the vinyl on eBay, where do you get it? Thanks for the replies!
This post has been edited by phokur: Apr 7, 2007 - 3:21 PM
I really like the look of netrata's car. I suppose the vinyls would ensure a even coat. I can't find the vinyl on eBay, where do you get it? Thanks for the replies!
This post has been edited by phokur: Apr 7, 2007 - 3:21 PM
i got a pic in my profile using testors candy apple red
Augusto
i know someone who does tint so i think i am just going to do mine that way.
Call me a traitor! See if I care. ;)
i love my redded tails, cheaper than jdm tails and less done
Woa, that looks good, what did you use? I'm definitely niteshading the whole front, still in the air about red or black for the rear tails. Not sure what would look best on a red celi.