Doing a FULL LED bulb swap. Only thing im not doing is the clock, climate control, and low beams.
Found 9006 Led bulbs, i want to know if anyone has played with something like that?? friends have them on their VIP cars and i kinda like it. rarely use my highs so this would be nice to have all lights on without blinding people.

Bought 16pc LED VIP Puddle lights. Was thinking about custom making clear side mirror lens' with 2 yellow LEDs for turns and 2 white LEDs for when i open my doors and unlock with alarm.

Ordered 20pcs or 194 leds. white color 5leds on one bulb. shoots 360`
3 for gauge(current leds dont cut it)
2 or sidemarkers
2 for rears
2 for courtesy lights

and the rest for my ideas

ordered 2 green and 2 white LED flexible and waterproof strips 90cm in length. will post my idea later
anyone know the replacement # for the Map 293 bulb in LED??? also the LED festoon # for the hatch courtesy light??

going to purchase 15 74 size led all white
1 for glove
1 for coin
1 for key ring
rest for gauge

anyone know if the 1157 Red LED and White and Yellow need that add on resistors??? i kinda like the Hyper-blinking with led turns. what is the 3rd stoplight bulb??
-4 yellow
-4 Red (i think, 2 each taillight)
-2 White for the backups
Confirm thats all i need for the tails and signals???

Wrap up
Exterior:
2 9006 white LED highs
front 2 yellow 1157 LED signals
front 2 194 white corners
rear 2 194 tail corners
rear 2 yellow 1157
rear 4 red 1157
rear 2 white 1157
2 194 white license plate
Interior:
3 194 gauge white
2 194 courtesy white
1 74 glove
1 74 coin
1 74 key ring
IIRC 12 74 in gauges

Ideas for the LED strips(will post later)
Change out CCFL green tubes for white 2 front and 2 rear

Still need to #size for:
MAP
Hatch festoon courtesy light
3rd Brale light



Might also try the LED Boards for the tails and Map

This post has been edited by 808celica: Aug 16, 2010 - 2:36 PM

K after some thread searching.........long searching.....i found a post that said the BA9 bulb (LED) replaces the 293 bulb in the Map. Confirm???? cant find anywhere that cross references. vleds.com doesnt show anything

Im gonna go rip in the 3rd brake light tomorrow or something.

Moneybags... Lol. Get some pictures up for us when you get this done. I want to do all of that to my car, exact same color scheme too. Not the LED headlights, but everything else.

lolz they're on order. I took advantage of the BestBuy site error, $10 for a 52" TV, total was $135 so that's out of my bank. the headlights will be on order soon

>
I need some of these for an idea I had too - got a link?

where did you order the Led for the interior, I'm in the process of changing the interior lighting, including the clock and climate control

>

For the clock, you don't need new lights. You just need some light filters. Death has some in his FS thread.

http://www.6gc.net/forums/index.php?showtopic=68322

>
pming you

>

all on ebay. might have to go through vleds.com for some of the bulbs though

10 out of 10 194 leds are in!!! they came in little farraday cages too 5 led 360` directional ones are here. gonne go swap out my gauges soon as the others come in.

**update: gauges in! courtesy lime green lights replaced, license plate bulbs replaced, front sidemarkers replaced(clear lens and white led, garauntee cop magnet hahahahah). hyper white ftw!!!


>

1995 TOYOTA Celica vleds.com. bolded is already bought either white or green

Low beam headlamp
9006------HID 6k

High beam headlamp
9005----68 LED White

Front turn signal
1157-2 yellow

Rear turn signal
1156-2 yellow

Tail light
1157--4Red

High mount stop light
921

License plate
194-----2 360` white led

Back up light
1156-----2White led

Front sidemarker
194---2 white

Rear sidemarker
194----2white

Glove box
74-1led

Map light
293/BA9----2 boards

Courtesy light
194-----2 white

Trunk
DE3022-----1 led

Instrument-general
194------3white
74-----------counted 15

This post has been edited by 808celica: Aug 25, 2009 - 8:23 PM

nice jon.....got to c those pix....because im planning on doin lights in the future too.......shoots

You got it bra! It's more hid white than pure white, gotta turn down the dimmer switch half way

Post up or shut up...

wait for night time fool!

Go find a parking garage....like near the mcdonalds(bitch spilled my rootbeer)or something

This post has been edited by CelicaST_CALI: Aug 18, 2009 - 3:36 PM

dude there is NO clouds in the sky you cant see ****

in a parking garage that doesnt matter...

yeah it does. obviously you forgot how hawaii is already

just picture the license plate lights shining down and lighting up the whole rear bumper and the road Hahahahah

Want the SMD Chip type LEDs but those are expensive and no one had a 10pc lot on ebay. These will have to do and when night falls they bring a smile to my face






These License plate bulbs are from a different dealer so it isnt HID white, its super white, its the SMD chip LED type. The Flat bank ones so it only shines down


This post has been edited by 808celica: Aug 18, 2009 - 4:42 PM

nice,are the courtesy lights plug and play??

baller. im doing this. well just the license plate lights

finish so i can seee!

>

depends on the person...................

This post has been edited by 808celica: Aug 18, 2009 - 10:27 PM

>

I'm looking to make my gauge cluster white like that. I currently have the stock bulbs and taped gel over the plastic to make the needles red and the gauges whatever color the stock bulbs are (a really warm white, nearly orange). How much did those 194 drop-in LED bulbs cost?

All automotive LED replacements I've seen are absolutely inane. $8 for 5 SMD LEDs? No, thank you. Did you use the ones that are 5 standard LEDs, 4 in a circular pattern with one facing out? Or did you use the 5-way SMD LED bulbs that are all too common.

The 5mm LED style replacement looks real easy to make... just get 5 LEDs, bend the leads around to the right shape and glue them together. Wire them up in series and solder them into the cluster... much cheaper than paying whatever ridiculous amount most places charge for the replacement, seeing as how LEDs are anywhere from $.10-$1.00 a piece.

The white looks great on those gauges though. I want mine to look the same, except with red needles (just need white bulbs/LEDs).

This post has been edited by solidxsnake: Aug 21, 2009 - 8:04 PM

>
Do u unplug the other bulb and plug this one in....

wheres the night pictures???

This post has been edited by CelicaST_CALI: Aug 22, 2009 - 2:20 AM

>

This bulb is a 5mm led facing straight and 4 3mm leds shooting 360`. these are called refractors?!?!? dunno why. i didnt get the smd leds because of the price. the smd ones are the chip looking leds which have a better glow, but they're like $2.50 more for each compared to these. Im happy with the glow on this set.

>

yeah and you will get the polarities wrong and you would have to unplug and switch it. i say depends on the person because sometimes you have trouble doing easy things

night pics will come sunday

****replaced my keyring bulb with a 5mm led 74 size. its hella bright!!! also took out the green 74 led i had in the glove and put a white one there too. next will be the coin light. green to white led exchange.

This post has been edited by 808celica: Aug 22, 2009 - 5:24 AM

LED strips in!!

NIOCE!!!where are those going?

Nice, dude, I'd like to see it..if you're in Kaimuki one evening give me a call, or I should say just send me a text..you're a textin fool..lol. I had no idea you were doing this, I just got my leds today! I got one white flexible strip of 9 leds, and 3 blue flexible strips of 9 leds. The white is going to be my bike license plate light, and the blue are all going around shiny stuff in my engine bay!

PArt 2 done!!! Key ring and The Secret is revealed!!

dammmm GUN SHOWWWW hahaha that is SEXY...nice mod