>
You read that right. No more coilovers for the time being. They ride stiffer than we like but mostly they've been knocking a lot and driving us nuts. I might rebuild them or I might sell them.


>
I believe I went with 16mm bushings for a tight fit. I know the bar itself is 17mm. The Miata end links are great! They're a huge upgrade over the three year old AutoZone end links I had. For the price, I can't see any reason to get anything different.

That knock you never figured out, huh? Odd. Guess they may require rebuild then. I may be interested if you're selling, maybe you'd be interested in my Sportline setup?

This post has been edited by SwissFerdi: Sep 5, 2012 - 9:14 PM

ha rebuild with wat money???? you can almost buy two sets of of megan coilovers with the cost of the trd cartridges.

>
Who said I was going to use TRD cartridges? Besides, I'm still on the fence with these. I may have Koni or another company here rebuild these just to keep the TRD branding, or I may sell them and ge a set of KYB GR2's and Eibach Sportlines or a set of Megan coilovers. I'll cross that bridge when I get there.

Anyway, time for an itty bitty teeny tiny update. It was time for new tires, and Brigette and I had been looking into new wheels. We liked Enkei RP03's and Advan RCII's, but first we wanted to see what our local parts supplier had in stock. So a short trip to Rhode Island later, and we had a set of ADR Vision's, TRD front strut bar, 10 mm spacers, black carpet to match the SS-III seats, new trunk plastic, new shift boot, and some other stuff I forgot. Thanks Dustin!

While we were on the road, my new Twos R Us front sway end links came in. So today I did a very, very quick wash and took some pictures.




Fitment is infinitely better than the stockers. I'll get the 10 mm spacers put in in a couple of days.


The engine bay is filthy- I haven't cleaned it in quite some time. Forgive me. Beams Silvertop!



Twos R Us end links, installed.




Then I was thirsty, so I brewed some tea.


Between the new end links all around, poly control arm bushings, new wheels and tires, and TRD strut bar, taking corners feels awesome. Next up, get the spacers in and get new front sway bar bushings and take care of the suspension, then on to bigger and better things.

This post has been edited by richee3: Sep 16, 2012 - 12:20 PM

lol @ the tea...

Ah, also an enjoyer of tea. Good man VB, good man. That strut bar looks good indeed, is deserving of a repaint though. The increase in grip must be nice.

Nice tea!

Can't wait to see this in person this weekend!

Or should I say sweet tea? I crack myself up sometimes.

mmmmm..... tea....

not my cup of....

^ Correct, it's his. Unless he broke into somebody's home and used their things, then well...

This post has been edited by SwissFerdi: Sep 17, 2012 - 9:35 AM

I'm not sure whose olive oil that is in the background... The candle seems kind of familiar though.

You guys are awesome.

>

so true haha ive been there many a times for parts

As stated before, there's no more low, but I did get the new wheels from Dustin. Installed 10 mm wheel spacers all around and halfway cleaned it today then snapped a couple of pictures just to show how it'll be sitting for the winter.




We have decided to prioritize a paint job over lowering it again, so that'll be coming somewhat soon. Money's halfway there, anyway. I have gotten somewhat lazy lately, and I've found a local car club doing some pretty cool things recently (1/2JZ swapped SC 300's, 1JZ swapped 240SX's as well as an SR20 swapped 240, and they're currently dropping a 2JZ in an Infiniti G35.) I have set up an appointment with them next Monday to roll my rear fenders for when we are ready to lower it again, as well as replace my crappy rear calipers with a working set. Just bought these earlier this year.... Then they'll be finishing up my extended BEAMS harness because I've been extra lazy with that and I haven't touched it since I pulled it off of the car. They'll be properly soldering it for me. They're doing all of this work for dirt cheap, while trying to convince me to join their club. It has membership dues but with those dues comes free use of their shop and tools... I'm torn between a great shop to work in when I need something done and being in a club called "Hostile Customs." I'll probably join, since they all seem pretty cool and have better tools and knowledge than I do.

/useless update slash thread bump.

I wouldn't care if the crews name was pink pony patrol if I got free access to a garage that can do those kind of swaps is join in a heart beat

didn't really notice the exhaust work and f1 racing flywheel you got till now.

its sounds good. Get some video's of what it sounds like with you crusing by at 50 or so. btw post it on the official custom exhaust thread...

saw that video of 15mph to 95 glad to see it pull nicely. are you using aluminzed steel piping for the exhaust?

This post has been edited by BonzaiCelica: Oct 16, 2012 - 1:01 AM

Hostile Customs? Do it.

We're already halfway in with a club in the city called 4 star society...

I'm in a club too.

hey Dan, mind slowing down with the upgrades so I can catch up?

lookin good man. Decide on a color yet?

love how things are coming along for u. Can't wait to see the paint job.

>
What he said

>
I have yet to get the flywheel installed. I need to stop procrastinating. You're using the same flywheel, aren't you? How do you like it? I'm glad you like the sound. I posted in the Universal Muffler thread in Multimedia but I still have to post up in the Custom Exhaust thread.

I'm torn on joining the club. They do some pretty cool things but they also have membership dues and meetings, which I barely have any time for. I'll talk to a few of the guys first and see what they say.

We're definitely going with the 3K6, Sunburst Pearl. I just have to stop buying shiny things that catch my attention so I actually have the funds for a paint job.

the power band feels like its moved up 300 rpm to be honest, so shifts at 7,300 rpm are where it should be. As if it feels like I need to get on the gas sooner so the momentum builds up faster. good quality exhaust, vibrant does good stuff.

like the look of your exhaust looks so oem!

This post has been edited by BonzaiCelica: Oct 16, 2012 - 3:12 PM

Teeny tiny update.






That's it for now.

You'll drive anywhere for parts haha nice pick up richee!

Lovely.

They look much better on the Hatch than 'Berto's Vert.

>
Of course I will! What's the point of doing all this work and putting all the money into this car if I'm afraid to drive it?


>
Thanks Brian! The pictures were rushed and the car is filthy, but oh well. We're talking to the body shop on Monday to set up an appointment, so there's no need in taking good pictures right now.

I think we pretty much all knew u were getting those rims sooner or later. hahahah.

glad u like them, they went to a good car. I just cant keep hoarding all this stuff.... hows the ride, you may need to check the air...