WTB TRD hood vent covers like the one that "97lestyousay" make it not so long time ago...delivered to Cyprus
cheers
cheers
wtb:TRD hood vent covers - 6G Celicas Forums
I'll see what I can have some made for. I can't make them, but I know a couple local shops that might be able to.
JDM guy made me do it.
>
QUOTE (97lestyousay @ Oct 15, 2010 - 10:50 PM) 
>I'll see what I can have some made for. I can't make them, but I know a couple local shops that might be able to.
Never heard of Trd hood vent covers. What do they look like? You're talking about the grills that is on the middle of the hood of a gt4?
>
not the best pic but u can see it
This post has been edited by Johnnyny: Oct 17, 2010 - 1:24 AM
QUOTE (dudeofchaos @ Oct 16, 2010 - 9:00 PM)
>Never heard of Trd hood vent covers. What do they look like? You're talking about the grills that is on the middle of the hood of a gt4?
not the best pic but u can see it
This post has been edited by Johnnyny: Oct 17, 2010 - 1:24 AM
I'd be interested in one of these if you could find someone to make a couple.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
>
Oh, pretty much the same as the original one.. exept with Trd on it lol
QUOTE (Johnnyny @ Oct 16, 2010 - 10:33 PM)
>>
not the best pic but u can see it
QUOTE (dudeofchaos @ Oct 16, 2010 - 9:00 PM)
>Never heard of Trd hood vent covers. What do they look like? You're talking about the grills that is on the middle of the hood of a gt4?
not the best pic but u can see it
Oh, pretty much the same as the original one.. exept with Trd on it lol
not exactly search the buying selling forum for them better pics there
Id be interested in it as well!! 
This is what they look like not mounted, these are unfinished un anodized. I haven't got an answer for you if I can have them made,
the cad files are with my former employer unless they have been deleted. I am trying to reach him to get them but haven't had any luck as of yet.
There were three styles I made, the later versions have an extra slot on each side on the bottom, and the wrc was cut completly through on the very last
ones.
the cad files are with my former employer unless they have been deleted. I am trying to reach him to get them but haven't had any luck as of yet.
There were three styles I made, the later versions have an extra slot on each side on the bottom, and the wrc was cut completly through on the very last
ones.
JDM guy made me do it.
I saw one in person this weekend for the first time - so nice
ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYOSUSP: Tein/Bilstein/SusTech/INT: SS-III SEATS/Toyota Hyper SportsEXT: WRC/TRD/404QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)Its a safety feature so that people like you don't end up killing themselves or everyone around them.Slow down Paul Walker.6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
Thanks
I just got off the phone with my old boss and he said, it shouldn't be a problem to get the files, I may try to work something out
to do some on his machine so we'll see how it goes. I think I can have the whole thing waterjetted except the logo, and cut it seperate.
I should know more by wednesday.
I just got off the phone with my old boss and he said, it shouldn't be a problem to get the files, I may try to work something out
to do some on his machine so we'll see how it goes. I think I can have the whole thing waterjetted except the logo, and cut it seperate.
I should know more by wednesday.
JDM guy made me do it.
>
sound good mate
i am very intersting of the one with TRD logo...
cheers
QUOTE (97lestyousay @ Oct 19, 2010 - 12:44 AM)
>Thanks
I just got off the phone with my old boss and he said, it shouldn't be a problem to get the files, I may try to work something out
to do some on his machine so we'll see how it goes. I think I can have the whole thing waterjetted except the logo, and cut it seperate.
I should know more by wednesday.
I just got off the phone with my old boss and he said, it shouldn't be a problem to get the files, I may try to work something out
to do some on his machine so we'll see how it goes. I think I can have the whole thing waterjetted except the logo, and cut it seperate.
I should know more by wednesday.
sound good mate
i am very intersting of the one with TRD logo...
cheers
prbably me too if you can have it made
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
I have the files, now I have to have them water jetted. I will try to get some cash to get this going, it may take a week or so to get the funds.
JDM guy made me do it.
thats nice, how much this gonna cost?
www.BruneiClassicCelica.Com
>
Sound nice mate
are you gona to make trd letters engraved on the part?
Cheers
QUOTE (97lestyousay @ Oct 21, 2010 - 8:36 AM)
>I have the files, now I have to have them water jetted. I will try to get some cash to get this going, it may take a week or so to get the funds.
Sound nice mate
are you gona to make trd letters engraved on the part?
Cheers
Mad4toy they should be around $80.00 each shipped to CONUS a little more for overseas.
cyprus that is the plan, I will do it after they are water jetted, or have another shop do it.
cyprus that is the plan, I will do it after they are water jetted, or have another shop do it.
JDM guy made me do it.
Put me down for one as well plz! Thanks
I have got one of my lenses on craigslist right now to try and get this going. Money is tight so it may take a little longer than I had hoped,
but I will get it going and keep everyone posted.
but I will get it going and keep everyone posted.
JDM guy made me do it.
Sweet
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
>
QUOTE (97lestyousay @ Oct 26, 2010 - 8:50 PM)
>I have got one of my lenses on craigslist right now to try and get this going. Money is tight so it may take a little longer than I had hoped,
but I will get it going and keep everyone posted.
but I will get it going and keep everyone posted.
I'd be down for a TRD one as well.
Thanks for getting back into this man!
Thanks for getting back into this man!
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
TRDTRDTRD!!!
Any new info on this? I'm still very interested as soon as this becomes available. Thanks.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
I am still trying to sel lmy lens for funding. I am really up in the air for the trd engraving, I am honestly not sure how I am going to be able to do it.
I drew another version with some tabs on the D to be cut completly through. I am not crazy about how it looks, but I could have the whole thing
waterjetted and it would get rid of the painting of the letters.
Here is what it would look like, not blue but alluminum in color.
This post has been edited by 97lestyousay: Nov 7, 2010 - 4:58 PM
I drew another version with some tabs on the D to be cut completly through. I am not crazy about how it looks, but I could have the whole thing
waterjetted and it would get rid of the painting of the letters.
Here is what it would look like, not blue but alluminum in color.
This post has been edited by 97lestyousay: Nov 7, 2010 - 4:58 PM
JDM guy made me do it.
i like it!!
i will take a TRD off your hands
i will take a TRD off your hands
I"M NOT A TOYOTA FAN, IM A FANATIC1984 accord hatch 5 speed (T-Belt)-Junkyard1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard1988 Dodge Aries K (sold)1969 Chevy El camino - Traded for celica1991 Dodge Daytona-Traded for Celica1988 Chevy Camaro-Work in Progress1989 Ford Mustang LX 5.0 - For Sale1995 Toyota Celica-Work in Progress
Yeah, I like it, I'd get one.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
I would definitely buy one as well
I am finding other potential problems structually with the R and D area it is extremely thin
in a couple spots, I really am hesitant to try waterjetting the whole thing. I did it on the wrc
version but the shape of the C in realtionship to the R allowed it to be cut through without
strength issues.
I made a few calls and it looks like I can probably rent a machine for a day to cut it.
Once they are watterjetted, I will get some info on who wants what. I am probably
going to do a hellica if there is some demand. I will draw it up and post a sample of
what that would look like.
in a couple spots, I really am hesitant to try waterjetting the whole thing. I did it on the wrc
version but the shape of the C in realtionship to the R allowed it to be cut through without
strength issues.
I made a few calls and it looks like I can probably rent a machine for a day to cut it.
Once they are watterjetted, I will get some info on who wants what. I am probably
going to do a hellica if there is some demand. I will draw it up and post a sample of
what that would look like.
JDM guy made me do it.