Sweet 
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
wtb:TRD hood vent covers - 6G Celicas Forums
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
>
QUOTE (97lestyousay @ Oct 26, 2010 - 8:50 PM) 
>I have got one of my lenses on craigslist right now to try and get this going. Money is tight so it may take a little longer than I had hoped,
but I will get it going and keep everyone posted.
but I will get it going and keep everyone posted.
I'd be down for a TRD one as well.
Thanks for getting back into this man!
Thanks for getting back into this man!
KAOS|THE PROGRESSION - SLOW & STEADY|PARTING OUT- it ALL must go!|
TRDTRDTRD!!!
Any new info on this? I'm still very interested as soon as this becomes available. Thanks.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
I am still trying to sel lmy lens for funding. I am really up in the air for the trd engraving, I am honestly not sure how I am going to be able to do it.
I drew another version with some tabs on the D to be cut completly through. I am not crazy about how it looks, but I could have the whole thing
waterjetted and it would get rid of the painting of the letters.
Here is what it would look like, not blue but alluminum in color.
This post has been edited by 97lestyousay: Nov 7, 2010 - 4:58 PM
I drew another version with some tabs on the D to be cut completly through. I am not crazy about how it looks, but I could have the whole thing
waterjetted and it would get rid of the painting of the letters.
Here is what it would look like, not blue but alluminum in color.
This post has been edited by 97lestyousay: Nov 7, 2010 - 4:58 PM
JDM guy made me do it.
i like it!!
i will take a TRD off your hands
i will take a TRD off your hands
I"M NOT A TOYOTA FAN, IM A FANATIC1984 accord hatch 5 speed (T-Belt)-Junkyard1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard1988 Dodge Aries K (sold)1969 Chevy El camino - Traded for celica1991 Dodge Daytona-Traded for Celica1988 Chevy Camaro-Work in Progress1989 Ford Mustang LX 5.0 - For Sale1995 Toyota Celica-Work in Progress
Yeah, I like it, I'd get one.
2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE
I would definitely buy one as well
I am finding other potential problems structually with the R and D area it is extremely thin
in a couple spots, I really am hesitant to try waterjetting the whole thing. I did it on the wrc
version but the shape of the C in realtionship to the R allowed it to be cut through without
strength issues.
I made a few calls and it looks like I can probably rent a machine for a day to cut it.
Once they are watterjetted, I will get some info on who wants what. I am probably
going to do a hellica if there is some demand. I will draw it up and post a sample of
what that would look like.
in a couple spots, I really am hesitant to try waterjetting the whole thing. I did it on the wrc
version but the shape of the C in realtionship to the R allowed it to be cut through without
strength issues.
I made a few calls and it looks like I can probably rent a machine for a day to cut it.
Once they are watterjetted, I will get some info on who wants what. I am probably
going to do a hellica if there is some demand. I will draw it up and post a sample of
what that would look like.
JDM guy made me do it.
I'd buy a hellica one as long as it works with the carbon fiber gt4 hood
It doesn't really look right the horns make it not fit so well. I could work on adjusting the slots to better accomodate it, but this is
what it looks like so far. I also thought about just the regular emblem.
Edit: I know nothing about a CF hood. It fits between the hood and cowl cover if it is an oem cowl cover it should fit fine.
I always use the felt washers between the hood and this piece as to not scatch the hood paint. I have never had an issue,
but the clear on a cf may be easier to scratch.
the logo no horns
This post has been edited by 97lestyousay: Nov 8, 2010 - 7:03 PM
what it looks like so far. I also thought about just the regular emblem.
Edit: I know nothing about a CF hood. It fits between the hood and cowl cover if it is an oem cowl cover it should fit fine.
I always use the felt washers between the hood and this piece as to not scatch the hood paint. I have never had an issue,
but the clear on a cf may be easier to scratch.
the logo no horns
This post has been edited by 97lestyousay: Nov 8, 2010 - 7:03 PM
JDM guy made me do it.
can you post an image of the wrc one if you already drew?
This is one that is cut through, the other version is on page one. If I make any WRC they will be like the one on page one,
I will have them all waterjetted the same, and they will just be blank until I engrave them.
I will have them all waterjetted the same, and they will just be blank until I engrave them.
JDM guy made me do it.
Put me down for the WRC
This post has been edited by Mr_Tee: Nov 15, 2010 - 10:48 PM
This post has been edited by Mr_Tee: Nov 15, 2010 - 10:48 PM
I'd be willing to prepay (immediately) if funding is a problem for you to get these started right now...I'm sure plenty of other people on here may be as well
ST205 Crew representChallenge Accepted
>
x2
QUOTE (schmooot @ Nov 16, 2010 - 7:07 PM)
>I'd be willing to prepay (immediately) if funding is a problem for you to get these started right now...I'm sure plenty of other people on here may be as well
x2
>
i am in
QUOTE (schmooot @ Nov 17, 2010 - 2:07 AM)
>I'd be willing to prepay (immediately) if funding is a problem for you to get these started right now...I'm sure plenty of other people on here may be as well
i am in
If something doesn't happen with my lens in the next couple weeks, I may have to do this.
I honestly don't want to accept any money until they are ready to ship. It is going to take a week or 2
for the water jetting another week for the engraving and prep the about another 1 to 2 weeks for anodizing.
I realize everyone is in a hurry but, prepaying is going to be a last resort.
This post has been edited by 97lestyousay: Nov 17, 2010 - 3:53 PM
I honestly don't want to accept any money until they are ready to ship. It is going to take a week or 2
for the water jetting another week for the engraving and prep the about another 1 to 2 weeks for anodizing.
I realize everyone is in a hurry but, prepaying is going to be a last resort.
This post has been edited by 97lestyousay: Nov 17, 2010 - 3:53 PM
JDM guy made me do it.
Still trying to get the money together to get this going. I have sold mine to the OP so it is going to happen pretty soon,
since I no longer have one for my own car. As soon as I get going I will start a FS thread and start getting info for what
people want.
since I no longer have one for my own car. As soon as I get going I will start a FS thread and start getting info for what
people want.
JDM guy made me do it.