wow, i just saw this. amazing work man. how much was the bill for that beyond the clip?
celi ST to true GT-Four swap - 6G Celicas Forums
UPDATES! UPDATES! I demand updates... lol 
>
im inclined to aggree with my buddy up there^ u musnt keep your audience waiting!!!
QUOTE(celi_gt_racer @ Dec 5, 2005 - 11:55 AM) [snapback]363454[/snapback]
>
UPDATES! UPDATES! I demand updates... lol
UPDATES! UPDATES! I demand updates... lol
im inclined to aggree with my buddy up there^ u musnt keep your audience waiting!!!
QUOTE (Galcobar @ Oct 15, 2008 - 2:44 AM)You want power but have no money. That's a problem.Cheap. Reliable. Fast. Pick two.
a fully built for boost 5SGTE with AWD...that would be hawt.
and yes more updates! this project is freakin' awesome!
bboy
and yes more updates! this project is freakin' awesome!
bboy
..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi..
>
wish i had a dad that was a master fabricator.
QUOTE(presure2 @ Nov 26, 2005 - 10:33 AM) [snapback]359726[/snapback]
>
the biggest factor in doing this swap is fabrication skills.
luckily, his dad is a master fabricator.
cant wait to see it finished!
the biggest factor in doing this swap is fabrication skills.
luckily, his dad is a master fabricator.
cant wait to see it finished!
wish i had a dad that was a master fabricator.
I gotz 2 things my celi and a dream, the prob is commin up with the thrid one...
yes yes yes, i know eveyone wants updates.
this past sunday we made a bunch of mounts and started to weld it all up. we only have two or three more mounts to make. after that, were gonna make sure everything is all straight and weld it all up for good.
following that, the fuel system will be a breeze.
then theres just a little more wiring to take care of inside for my heating and everything. then it should be damn near done. as long as i can find some rims that fit. oh ya gonna paint it too.
when the rear is near done, ill post some pics.
this past sunday we made a bunch of mounts and started to weld it all up. we only have two or three more mounts to make. after that, were gonna make sure everything is all straight and weld it all up for good.
following that, the fuel system will be a breeze.
then theres just a little more wiring to take care of inside for my heating and everything. then it should be damn near done. as long as i can find some rims that fit. oh ya gonna paint it too.
when the rear is near done, ill post some pics.
cant wait to see wat it looks like
I gotz 2 things my celi and a dream, the prob is commin up with the thrid one...
yea!!!!
The most important lesson I learned from Karate-Dô Kyôshan–“You can not be what you do not believe you are”
how much did this whole process cost you ? time and money wise i would love to do the conversion but the time and money realisticly thatz a lot. i would rather buy a real one for collectors
I gotz 2 things my celi and a dream, the prob is commin up with the thrid one...
can u take some close up pics of the custom mounts you had to make to bolt the rear end on ? there is very little info on this and you are one of a handfull of people to every try it, so as many detailed pics you can get us the better
15PSI - 30MPG - Megasquirt Tuned
Bump, hows it going?
QUOTE (cjh4l22 @ May 15, 2009 - 4:02 AM)hey, nice mod does it come in hetero?Need parts?I'm parting out a '94 ST
Any update?
i think this guy died or something ... lol
cuz this thread sure has been dead for awhile.....
anywayz.... i hope its coming along well and updates maybe on the way??
cuz this thread sure has been dead for awhile.....
anywayz.... i hope its coming along well and updates maybe on the way??
im sure he's just busy or something...lol
bboy
bboy
..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi..
nice project.
Congrats on the project its incredible! Im in CT also Id love to check this out once it is running maybe we can organize a meet for CT and RI or something.
>
Ditto!
QUOTE(94GT @ Jan 8, 2006 - 1:47 AM) [snapback]375784[/snapback]
>
Any update?
Any update?
Ditto!
-TomazWSwww.tomazws.com
BUMP BUMP BUMP
whats up everyone? sorry i have been very busy lately so i kind of forgot about the post.
haha, stupid me.
well its definately coming along very nicely, but unfortunatley there was about a month
when it was not worked on. all these holidays and crap killed it.
we got all the mounts for the rear end and drive shaft welded and painted. just
a few more finishing touches on the rear and that part is done. the holder for the
fuel cell is all welded and drilled out. all thats left is to finish the fuel system,
hook up the e-brake cables, make a stupid little mount for the throttle cable,
finish up the little bit of wiring for the heater, then paint.
one big problem that im having is im waiting for my rims to come in. i've waited like
two weeks already and there not in yet. and i dont even know if there gonna fit correctly.
i went to a car show and measered the space to make sure they would fit and they would,
but they are 8.5" wide. as soon as i get them and find out if they will fit or not,
then i can do the brakes and im done.
oh yeah, i cant forget the fact that i have to put the whole interior back together...
oh ya, i almost forgot, having a meet in CT or RI would be sweet. we should do it.
haha, stupid me.
well its definately coming along very nicely, but unfortunatley there was about a month
when it was not worked on. all these holidays and crap killed it.
we got all the mounts for the rear end and drive shaft welded and painted. just
a few more finishing touches on the rear and that part is done. the holder for the
fuel cell is all welded and drilled out. all thats left is to finish the fuel system,
hook up the e-brake cables, make a stupid little mount for the throttle cable,
finish up the little bit of wiring for the heater, then paint.
one big problem that im having is im waiting for my rims to come in. i've waited like
two weeks already and there not in yet. and i dont even know if there gonna fit correctly.
i went to a car show and measered the space to make sure they would fit and they would,
but they are 8.5" wide. as soon as i get them and find out if they will fit or not,
then i can do the brakes and im done.
oh yeah, i cant forget the fact that i have to put the whole interior back together...
oh ya, i almost forgot, having a meet in CT or RI would be sweet. we should do it.
dude GET MORE PICS!!!!!!!!!!!
of EVERYTHING
btw 8.5" wheels are fine...
of EVERYTHING
btw 8.5" wheels are fine...
gezzz, i wish i could see the pics...they're not working for me 
...i can't see your project!!! uggg...let me know what i can do to see this crazy awesome venture.
~snap
...i can't see your project!!! uggg...let me know what i can do to see this crazy awesome venture.~snap
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
You're project looks to be coming along great. Congratulations on making it this far. I hope the rest of the build goes as smoothly.
If you don't mind I've got a few questions for you.
Which rear end did you decide to use? Axles?
Which Knuckle/hub/bearing combonation?
Strut setup?
Swaybar?
Brake discs and calipers/caliper mounting brackets?
The reason I asked is because that doesn't look like the 6th gen GT4's super strut setup. I assume it's from an ST185 alltrac but I really hate to guess.
If you don't mind I've got a few questions for you.
Which rear end did you decide to use? Axles?
Which Knuckle/hub/bearing combonation?
Strut setup?
Swaybar?
Brake discs and calipers/caliper mounting brackets?
The reason I asked is because that doesn't look like the 6th gen GT4's super strut setup. I assume it's from an ST185 alltrac but I really hate to guess.
Project ST204.5 99.88946% complete...
Nice Celiman
I cant wait to see the finish product.
You'll soon have followers after this is
complete
I cant wait to see the finish product.
You'll soon have followers after this is
complete
98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!
wow i cant wait, this is going to be great! great work so far!
>
well when i bought the front clip, they sent me everything.
the rear end, axles, hubs, struts, sway bar, and brakes.
everything came out of a 6gc (i believe).
i got such a sweet deal on it, i almost got a whole damn car.
QUOTE(WannabeGT4 @ Jan 26, 2006 - 2:51 PM) [snapback]384808[/snapback]
>
You're project looks to be coming along great. Congratulations on making it this far. I hope the rest of the build goes as smoothly.
If you don't mind I've got a few questions for you.
Which rear end did you decide to use? Axles?
Which Knuckle/hub/bearing combonation?
Strut setup?
Swaybar?
Brake discs and calipers/caliper mounting brackets?
The reason I asked is because that doesn't look like the 6th gen GT4's super strut setup. I assume it's from an ST185 alltrac but I really hate to guess.
You're project looks to be coming along great. Congratulations on making it this far. I hope the rest of the build goes as smoothly.
If you don't mind I've got a few questions for you.
Which rear end did you decide to use? Axles?
Which Knuckle/hub/bearing combonation?
Strut setup?
Swaybar?
Brake discs and calipers/caliper mounting brackets?
The reason I asked is because that doesn't look like the 6th gen GT4's super strut setup. I assume it's from an ST185 alltrac but I really hate to guess.
well when i bought the front clip, they sent me everything.
the rear end, axles, hubs, struts, sway bar, and brakes.
everything came out of a 6gc (i believe).
i got such a sweet deal on it, i almost got a whole damn car.
Yeah, I found out after I posted that the ST205 superstrut rear struts don't differ much in appearance compared to the Macpherson struts in the ST204. It's only the fronts that are drasticly different.
BTW, How are things progressing?
BTW, How are things progressing?
Project ST204.5 99.88946% complete...
ahhhh, i can see the pics now 
great job
~snap
great job ~snap
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
things are going SWEET! thats all i have to say....
almost done.
almost done.
can you take any detailed pics of how the rear end is mounted? this would really help out others that are considering the same thing
15PSI - 30MPG - Megasquirt Tuned
>
PICCCCCs Please
QUOTE(celiman05 @ Feb 3, 2006 - 5:39 PM) [snapback]388600[/snapback]
>
things are going SWEET! thats all i have to say....
almost done.
things are going SWEET! thats all i have to say....
almost done.
PICCCCCs
Please
Visit My Automotive & Tech Blog.