Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #66773

2 Stage 3SGTE Swap thread - 6G Celicas Forums

Topic #66773 173 posts Started by SlvrCelica09
02bluerolla
#151
>
QUOTE (Culpable04 @ May 6, 2010 - 7:51 AM) *
>2nd gen timing belt works, it's just one tooth shorter then the 3rd gen, a lot of people are using 2nd gen belts, but ordering a 3rd gen belt from your dealer shouldn't be a problem so get the belt that is meant for it.


Do you have an idea how long that might take to get here.......
http://www.japanparts.com
02bluerolla
#152
>
QUOTE (Fate @ May 6, 2010 - 7:44 AM) *
>2nd gen doesn't fit. buy OEM (from dealer) or Bando. part #: 5pk1120

look for a bando dealer nearest you and order from there.


Hey, thanks for the info..... but are you sure thats the part number........ I check ... it says its for a tercel.....
http://www.japanparts.com
Culpable04
#153
when I ordered mine it took 3 days, I ordered it at my local dealer and went 3 days later to pick ip up.

when ordering don't tell them is for a JDM engine, just give them the part number or they may try to squeeze some extra cash out of you.
02bluerolla
#154
thats a good idea.......... dut i dont know the toyota part number, can u help me with that pls.
http://www.japanparts.com
02bluerolla
#155
[13568-79105] is this the part number
http://www.japanparts.com
Culpable04
#156
13568-79105 3SGTE..ST205 1 $53.67
02bluerolla
#157
>
QUOTE (Culpable04 @ May 6, 2010 - 9:26 AM) *
>13568-79105 3SGTE..ST205 1 $53.67


Your not going to belive this, i found one at my local dealer........ I cant belive it. What are the odds of them having on in stock?
Praise God For that!
http://www.japanparts.com
02bluerolla
#158
Bad news... replaced the belt.... same thing
http://www.japanparts.com
02bluerolla
#159
We tried the distributor from my 2nd gen.... same thing..
Check fuel presure..... seems to be really low..... looking into that right now
http://www.japanparts.com
02bluerolla
#160
Ok, i replaced the timing belt with a 3rd gen timing belt. Same thing.......
We change the distributor with my 2nd gen distributor..... same thing
We check fuel pressure... seemed low... took out the filter, seemed dirty, check the fuel pump, put everthing back together.... same thing.......
What else could this be?
http://www.japanparts.com
lagos
#161
>
QUOTE (02bluerolla @ May 6, 2010 - 7:21 PM) *
>Ok, i replaced the timing belt with a 3rd gen timing belt. Same thing.......
We change the distributor with my 2nd gen distributor..... same thing
We check fuel pressure... seemed low... took out the filter, seemed dirty, check the fuel pump, put everthing back together.... same thing.......
What else could this be?



The fuel pump circuit is one of the things that needs to be wired up in order for the 3rd gen engine to work in our cars. Check and redo the wiring, and I would also remove the fuel pump out of the tank to make sure that was installed correctly or there is not a cracked fuel pump hose or something funny going on.

15PSI - 30MPG - Megasquirt Tuned
pittfirefighter
#162
get that harness checked out... every single wire should be examined
Breaking Axles...
02bluerolla
#163
>
QUOTE (lagos @ May 6, 2010 - 7:52 PM) *
>>
QUOTE (02bluerolla @ May 6, 2010 - 7:21 PM) *
>Ok, i replaced the timing belt with a 3rd gen timing belt. Same thing.......
We change the distributor with my 2nd gen distributor..... same thing
We check fuel pressure... seemed low... took out the filter, seemed dirty, check the fuel pump, put everthing back together.... same thing.......
What else could this be?



The fuel pump circuit is one of the things that needs to be wired up in order for the 3rd gen engine to work in our cars. Check and redo the wiring, and I would also remove the fuel pump out of the tank to make sure that was installed correctly or there is not a cracked fuel pump hose or something funny going on.



We did, and indeed the wiring was not right....... we inspercted the filters and clean them.....
but its still the same......
We are redoing the harnest tomorrow..... but first we would like to check the vacuum lines....... but cant find a vacuum diagram for the 3rd gen..... any ideas where i can find one?
http://www.japanparts.com
02bluerolla
#166
Hey guys, We took of the wiring harnest today...... will look into it tomorrow and see whats what.............
Does any one here have a TPS, Ignitor, MAF, for the 3rd Gen that they are selling am interested..... thanks!
http://www.japanparts.com
pittfirefighter
#167
>
QUOTE (02bluerolla @ May 9, 2010 - 2:44 AM) *
>Hey guys, We took of the wiring harnest today...... will look into it tomorrow and see whats what.............
Does any one here have a TPS, Ignitor, MAF, for the 3rd Gen that they are selling am interested..... thanks!



OK YOU HAVE A REALLY BIG PROBLEM IF YOU'RE ASKING THAT.... there is no MAF for a 3rd gen!!!!
Breaking Axles...
02bluerolla
#168
>
QUOTE (pittfirefighter @ May 10, 2010 - 8:44 PM) *
>>
QUOTE (02bluerolla @ May 9, 2010 - 2:44 AM) *
>Hey guys, We took of the wiring harnest today...... will look into it tomorrow and see whats what.............
Does any one here have a TPS, Ignitor, MAF, for the 3rd Gen that they are selling am interested..... thanks!



OK YOU HAVE A REALLY BIG PROBLEM IF YOU'RE ASKING THAT.... there is no MAF for a 3rd gen!!!!


lol ur right, i meant map
http://www.japanparts.com
SlvrCelica09
#169
you should ask JIM for any parts you need. That's where the motor set originally came from.
THIS IS WHERE WE HOLD THEM!Still trying to find the cure for ST205 asthma..6gc.net's outlaw vigilante because im a LEADER not a follower.
02bluerolla
#170
>
QUOTE (SlvrCelica09 @ May 11, 2010 - 5:38 PM) *
>you should ask JIM for any parts you need. That's where the motor set originally came from.

I did he never return the pm
http://www.japanparts.com
SlvrCelica09
#171
>
QUOTE (02bluerolla @ May 12, 2010 - 12:37 AM) *
>>
QUOTE (SlvrCelica09 @ May 11, 2010 - 5:38 PM) *
>you should ask JIM for any parts you need. That's where the motor set originally came from.

I did he never return the pm


I wonder why he would ignore your pm.. not to bring up any old speculation about the engine. That was in 09.. so ill leave it there. Any new updates?
THIS IS WHERE WE HOLD THEM!Still trying to find the cure for ST205 asthma..6gc.net's outlaw vigilante because im a LEADER not a follower.
_Jim_
#172
>
QUOTE (SlvrCelica09 @ Jun 16, 2010 - 3:35 PM) *
>>
QUOTE (02bluerolla @ May 12, 2010 - 12:37 AM) *
>>
QUOTE (SlvrCelica09 @ May 11, 2010 - 5:38 PM) *
>you should ask JIM for any parts you need. That's where the motor set originally came from.

I did he never return the pm


I wonder why he would ignore your pm.. not to bring up any old speculation about the engine. That was in 09.. so ill leave it there. Any new updates?


Just to clear this up, I receive anywhere from 15-30 pm's a day. If you feel as tho you were ignored, shot me another pm. I dont ignore pm's/phone calls/or emails. If I havent sent you a responce, it is because I have missed it amongst all the others.

As for this situation, he shot me another PM and I gave him pricing on parts he requested and a list of things to check out on his car.
330whp 309ft/lbs @ 21 PSI
SlvrCelica09
#173


cool man.. wasnt implying anything with what I said.. people have been twisting my words around lately so I feel I have to be clear if I say anything here on 6gc. everything is cool smile.gif
THIS IS WHERE WE HOLD THEM!Still trying to find the cure for ST205 asthma..6gc.net's outlaw vigilante because im a LEADER not a follower.
← Back to Topics

Page 6 of 6 (173 total posts)