>
QUOTE (playr158 @ Apr 24, 2014 - 1:20 PM)
>200hp.....I don't know if this is enough for the swap + AWD
Why not get the Aussie version then?
>
QUOTE
>It is the first original equipment (OE) application in the world for the new four-lobe Eaton TVS (Twin Vortices Series) supercharger.
TRD Aurion's supercharged 3.5-litre dual-VVT-i Quad Cam 2GR-FE V6 engine delivers 241kW of power at 6400rpm and 400Nm of torque at 4000rpm, on 98-octane premium unleaded petrol.
The supercharged engine has more than 300Nm of torque available from 1250rpm through to redline.
It is matched to an intelligent six-speed automatic transmission with sequential shift.
The supercharged engine gives TRD Aurion 0-100km/h acceleration of 6.1 seconds and standing 400m acceleration of 14.2 seconds.
^That's 323 HP for you American's
This post has been edited by JoshuaM: Apr 24, 2014 - 3:34 PM
SOLD :( 1997 ST204 Celica ZR ----->See it here on 6GC!2013 October Celica of the Month XDNow: '00 NB8B Mazda MX5 ----->See it here in off topic!
>
QUOTE (Box @ Apr 24, 2014 - 4:01 PM)
>>
QUOTE (playr158 @ Apr 24, 2014 - 12:20 PM)
>200hp.....I don't know if this is enough for the swap + AWD
The ST165 was 190 turbocharged AWD and the ST185 was 200hp turbocharged AWD.
Lots of AWD cars with less power even...
My B7 avant is a 2.0t with 200hp and AWD TOO.
I didn't say it wasn't done. Its not worth building a project awd and not being able to up the power to something worth while. A 3s can be used and net over 300 HP easily. This would require a turbo kit and more work
>
QUOTE (Box @ Apr 24, 2014 - 4:01 PM)
>>
QUOTE (playr158 @ Apr 24, 2014 - 12:20 PM)
>200hp.....I don't know if this is enough for the swap + AWD
The ST165 was 190 turbocharged AWD and the ST185 was 200hp turbocharged AWD.
Lots of AWD cars with less power even...
My B7 avant is a 2.0t with 200hp and AWD TOO.
I didn't say it wasn't done. Its not worth building a project awd and not being able to up the power to something worth while. A 3s can be used and net over 300 HP easily. This would require a turbo kit and more work
3 years after being a dream, it becomes a reality.
Im going to let you all into a secret... but that is it... dont get greedy...
some members already know....
but i bet you did not...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
awesome!
get that beams done so we can see this.
*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
You're giving me the itch again......
~bloodMoney
lol, i figured id share, tough there wont be a build thread, because well, im swimming in dark waters. I could not keep it underwater anymore. i think this will be the future...
its massive, but i have a 4 day weekend coming, and i will know if it fits, or ill make it fit...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
QUOTE (njccmd2002 @ Jul 2, 2014 - 10:44 AM)
>lol, i figured id share, tough there wont be a build thread, because well, im swimming in dark waters. I could not keep it underwater anymore. i think this will be the future...
its massive, but i have a 4 day weekend coming, and i will know if it fits, or ill make it fit...
1995 GT::::Diffusing the Situationエキサイティングカーレーシングチーム!march2010 COTM:6GCfeature2014:january2015-2016-2018 COTM
I've been waiting for you to make it official. This gonna be fun.
Has no more Celicas
Aww, I'm not special anymore.
2001 Miata LS 5-speed
OOooooo come on!!! Make a build thread for this sucker! document document document
I've been thinking about this also lately, but it seems with everything I wanna do with the setup it's gonna be a high price tag, maybe in the 10k range. I would run a stand alone and forget the whole drive by wire deal, run ITB's, yes the sound makes them worth it. I would have to get an E series transmission and then rebuild it with an OS Giken diff or some thing along those lines resulting in $10,000 USD maybe more. I've been thinking of how i would cope with the torque in a FWD, so either refining the suspension more and balancing wheel track with wheel offset or superstrut. still playing the lotto..... and if i did i would also build a 2mzfe screamer it has just the right rod/stroke ratio to be at 10k rpm singing.
This post has been edited by rdyzz: Jul 2, 2014 - 9:00 PM
Im sorry to say this is the end of the discussion.
Moderators can lock the thread now. no need to have two threads.
I will start a thread, soon... maybe, idk
im going to leave you with this... no more details. sorry, all specific details pertaining to the celica swap will not be released until im done...
i made a video also of the first fittings, not much but im sure youll enjoy it...
https://www.youtube.com/watch?v=Vefp3ITBu1Ino more discussion, this is a reality
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
my st205 swapandour Beams swap
I'm never okay with being rickrolled. But sax guy makes it alright this time lol
standing by for epic 2GR thread!
>
QUOTE (njccmd2002 @ Jul 5, 2014 - 7:11 PM)
>i made a video also of the first fittings, not much but im sure youll enjoy it...
https://www.youtube.com/watch?v=Vefp3ITBu1Ino more discussion, this is a reality
you A-HOLE ha ha ha i was expecting Epicness!!! congrats on getting a 2GR in there. Im looking forward to your build thread.
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
awesome berto!
looking forward to the first startup vid!!
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
That's more than nice!
Where was this thread???
Congratulations just for trying this.
I hope you finish it soon and drive it!
I watched the WHOLE video... twice! and i didn't see where you talked about the fitting and 2gr???
hahahaha. you and Tigawoods with your internet memes and rick rolling videos. start a thread so i can subscribe.
*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
well, im glad you guys liked it. engine is in. the picture you guys saw was a mock. spent good day today aligning and reinstalling the subframe and the power steering.
im going to leave with this pic. and use your imagination....
no its not done. not yet...
it will require a lot of
some
and a little bit of
not for your average homebuilder,
This post has been edited by njccmd2002: Jul 6, 2014 - 8:54 PM
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
I foresee a hole in the hood to fit the intake manifold.
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
Not bad.
Is the pass side mounted for real ?
If so and it's a bit unlevel, shim the driver's side to lower it a bit.
my st205 swapandour Beams swap
So much pr0n in that post.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
I'm away for a week and this happens?
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
>
QUOTE (Rusty @ Jul 6, 2014 - 11:09 PM)
>I'm away for a week and this happens?
Yep, that's how it always is.
Hmm, could make a blister in the hood to clear the engine. I'm sure something could be done so it's aesthetically pleasing.
2001 Miata LS 5-speed
Nice Progress! I would check the angle of the chassis also, jack stands are never very accurate at making sure you have and exactly flat angle. The strut tops are also good points to use to help align the engine. I only say this cause i pretty much had to do the same thing in order to fit a 3s into my corolla. If i had the money now the 2gr is something I also want to tackle.
This post has been edited by rdyzz: Jul 7, 2014 - 6:12 PM
