Engine/Transmission/Maintenance
14,249
Total Topics
25
Showing
32
Page 32 of 570
Topics in Engine/Transmission/Maintenance •
newest topics first
Hi all,
I have a 1995 ST, all stock on the engine side, fitted with ST205 (GT4) brake rotors and calipers, 17" wheels.
I've found for sale a 4th gen c...
^+1, my in law told me the same thing. To make easier, cheaper, and power. Go with some type of forced induction. NA builds are costly and is hard to ...
Does year matter at all? 94 was the year things switched from R12 to R134A....
have you jumped the pins in the diagnostic box(Te1 to E1) to get the CEL codes?
that would be a good place to start. Otherwise how long has it been s...
i have a 99 celica gt automatic and i blew the trans i have a guy near me selling a 96 celica gt trans i wanna know if it will fit before i buy it so ...
FIXED!!!!!! all I had to do is bleed the cooling. I didn't use a spill free funnel and I bearly saw any air bubbles escape and I didn't have to put in...
a guy in ottawa is selling a 91 mr2 lsd tranny on kijiji if your interested? at least he says its a LSD......
basics for cammed 5s:
1. Camshafts
2. Shims
3. SAFC
4. Wideband A/F gauge...
check the resistor, and check expansion valve, that happened to mine after the swap. but i barely used my ac b4 swap im still using 5s compressor, i d...
after replacing the motor and robbing some clips from a Camry I can say that the accelerator cable not being clipped in 3 places was 99% of my problem...
Don't undo the rack.
Remove the front to back crossmember then drop the subframe about 2", that makes it very easy.
You don't have to remove the cross...
As the topic says, How do you ajust the valves on 7afe?
any detatailed description is verry helpfull...
i have an E153 and im 99% sure i used the same slave...
i blew my trans trying to do a burnout in an automatic so i need a new one and someone is selling a 93 celica trans so i just want to know if it fits...
can someone help me where I can find a decent exhaust for my celica gt (5sfe)...
Another update.
Pumping the clutch doesn't seem to help much. But today as I was leaving for school, the car shifted into first just fine, then I went...
I had quite the journey working on my car the past few days. I replaced the cv axle on the driver's side and just wanted to share a few tips with you....
Just keep your cam/regrinds relate posts in 1 thread.
cheers...
As some of you may know I and doing my head gasket and i wanted to regind some 5sfe camgears. My car is a DD but I want more power preferable at take ...
I cannot seem to find a good diagram. I am lost with the hose on the front(engine front) side of intake manifold. The hose bottom right (looking at fr...
2 things i can think of mike.
#1, pcv is definetly gonna need a catch can, its definetly gonna blow that funky mist thru the filter in racing conditio...
look on the back of the intake manifold. you should see the grounds bolted down there...
Hello I have a 1995 celica GT st204 with a 5sfe engine. I have decided to not swap the beams because of the lack of parts that are readily available i...