short shifter installed - 6G Celicas Forums
yes
ss-iii splitters and 404 skirts areon. which means i need to update my sig.
was gonna get the short shifter from TWM and didn't the 7th gen short shifter will fit til i found this post
thank alot guys you save me some cash
thank again
thank alot guys you save me some cash
thank again
Does anyone know if the short shifters found on ebay for the 7th Gen Celica, fits the 6 Gen Celica GT-Four??
What is the difference between a 7th gen, TWM and TRD short shifter?
Apart from them being made by different businesses
Apart from them being made by different businesses
Anyone?
>
the 7th gen and TWM short shifters are just that - short shifters. They lower the top of the shifter and reduce the throw of the shift about 60%, giving you a shorter, more precise shift all together.
info on 7th gen and TWM shifters
the TRD Quick shifter is the entire shifter assembly. It reduces the throw about 40% and the top of the knob isn't as low as the others because it is made to shift quickly and keep your hand closer to the steering wheel for better control.
info and pics of TRD Quick Shifter vs stock shifter
as for fitting a GT-Four, I have read somewhere that they do not fit in RHD Celicas, but I could be wrong. Try asking in forum at celica-club.co.uk
This post has been edited by Batman722: Jun 3, 2006 - 10:19 PM
QUOTE(beno @ May 31, 2006 - 5:59 PM) [snapback]439872[/snapback]
>
What is the difference between a 7th gen, TWM and TRD short shifter?
Apart from them being made by different businesses
What is the difference between a 7th gen, TWM and TRD short shifter?
Apart from them being made by different businesses
the 7th gen and TWM short shifters are just that - short shifters. They lower the top of the shifter and reduce the throw of the shift about 60%, giving you a shorter, more precise shift all together.
info on 7th gen and TWM shifters
the TRD Quick shifter is the entire shifter assembly. It reduces the throw about 40% and the top of the knob isn't as low as the others because it is made to shift quickly and keep your hand closer to the steering wheel for better control.
info and pics of TRD Quick Shifter vs stock shifter
as for fitting a GT-Four, I have read somewhere that they do not fit in RHD Celicas, but I could be wrong. Try asking in forum at celica-club.co.uk
This post has been edited by Batman722: Jun 3, 2006 - 10:19 PM
my st205 swapandour Beams swap
http://cgi.ebay.com/ebaymotors/Short-Shift...sspagenameZWDVW
So this shifter will fit and i can install it using the TWM Shortshifter insturctions stated for 6th gen?
Correct?
How about this one? Will this one fit also?
http://cgi.ebay.com/ebaymotors/OBX-Short-S...sspagenameZWDVW
This post has been edited by CelicaGT04: Jun 6, 2006 - 9:34 PM
So this shifter will fit and i can install it using the TWM Shortshifter insturctions stated for 6th gen?
Correct?
How about this one? Will this one fit also?
http://cgi.ebay.com/ebaymotors/OBX-Short-S...sspagenameZWDVW
This post has been edited by CelicaGT04: Jun 6, 2006 - 9:34 PM
I would say yes
my st205 swapandour Beams swap
does anyone find the shifter a bit losse
i can move mine abit when in gear i think it because of the ball is a bit smaller then the cap
just woner if anyone have the same problem
i can move mine abit when in gear i think it because of the ball is a bit smaller then the cap
just woner if anyone have the same problem
my stock shifter assembly moves a lil i have a 96 ST, and its well...like in the pics, plastic and giving...it makes me want somthin rugged and metal...any suggestions?
though the pic also had the upgraded one plastic also... so is this not a problem for most people?
oh ya, never messed with the assembly, is it easy to install a new one?
though the pic also had the upgraded one plastic also... so is this not a problem for most people?
oh ya, never messed with the assembly, is it easy to install a new one?
Ive bought the short shifter for the celica gen. 7th, but its not good for my GT4, the problem is in the plastic clip that go in the cable of the gearbox, the short shifter for the GT4 are bigger than the 7th gen. ive modded the 7th gen short shifter but i havent tried it yet because my car is still disassemblee, but they seems to be good, i will post some pics later
yea i have the same problem too, mine moves an insane amount... i bought the same one celicagt04 was looking at... it moves ALOT, like its insane to drive cause it feels like neutral all the time, im thinking about tjust rapping the ball in a ****tttload of electrical tape, that might help. ghetto style
**If you play My Brute, joing the 6gc.net clan!**--A section of a kid's actual test that had been scanned--
this is the job that I have done for having a short shifter!!
This post has been edited by Cobra: Jun 27, 2006 - 1:19 PM
This post has been edited by Cobra: Jun 27, 2006 - 1:19 PM
to comparison, the different dimensions are noticed of you hook him
>
I have made the thing that seemed me more correct, it is important possession a reliable system.
byez
QUOTE(tonytutino @ Jun 27, 2006 - 6:05 AM) [snapback]449421[/snapback]
>
yea i have the same problem too, mine moves an insane amount... i bought the same one celicagt04 was looking at... it moves ALOT, like its insane to drive cause it feels like neutral all the time, im thinking about tjust rapping the ball in a ****tttload of electrical tape, that might help. ghetto style
yea i have the same problem too, mine moves an insane amount... i bought the same one celicagt04 was looking at... it moves ALOT, like its insane to drive cause it feels like neutral all the time, im thinking about tjust rapping the ball in a ****tttload of electrical tape, that might help. ghetto style
I have made the thing that seemed me more correct, it is important possession a reliable system.
byez
...........................holy crap. All that for a short shifter. Dude, thats nuts.
Teh Celica sleeps for Winter '06. Suspension overhaul begins........
How does a short shifter work?
Hey, i read somewhere while searching that the 7th. gen ones don't fit very well...and have some problem with the unit moving while shifting? True? I assume this is just due do a bad install since Dustin has compared side by side.
~snap
~snap
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
i dunno about everyone else... but mine was really easy to install. and it works great. no doubt one of the best mods i've done to my car and for only about 40 bucks.
ss-iii splitters and 404 skirts areon. which means i need to update my sig.
This is going to be one of my "mod" can anyone confirm that they shake too much or not?? or is it because of normal wear
just posting to confirm that 7th gen short shifters DO fit on RHD celi's
fitted it yesterday
reduces it quite a bit and stiffens it up even more...
love it
fitted it yesterday
reduces it quite a bit and stiffens it up even more...
love it
Anyone confirm if Mobil 1 Synthetic grease will work? Says its for Wheel bearings, Chassis, Suspension and Universal Joints.... Thanks
>
?
QUOTE(snapshotgt @ Jul 28, 2006 - 1:51 PM) [snapback]462509[/snapback]
>
Hey, i read somewhere while searching that the 7th. gen ones don't fit very well...and have some problem with the unit moving while shifting? True? I assume this is just due do a bad install since Dustin has compared side by side.
~snap
Hey, i read somewhere while searching that the 7th. gen ones don't fit very well...and have some problem with the unit moving while shifting? True? I assume this is just due do a bad install since Dustin has compared side by side.
~snap
?
Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor
BUMP for my question 2 posts up 
the twm short shifter for the 6th gen is shorter... by far
This post has been edited by Punch: Aug 12, 2006 - 4:03 PM
This post has been edited by Punch: Aug 12, 2006 - 4:03 PM
>
twm ss
QUOTE(Punch @ Aug 12, 2006 - 5:02 PM) [snapback]468256[/snapback]
>
the twm short shifter for the 6th gen is shorter... by far
the twm short shifter for the 6th gen is shorter... by far
twm ss
Anyone confirm if Mobil 1 Synthetic grease will work? Says its for Wheel bearings, Chassis, Suspension and Universal Joints.... Thanks
>
it should be fine
QUOTE(laff09 @ Aug 12, 2006 - 7:08 PM) [snapback]468273[/snapback]
>
Anyone confirm if Mobil 1 Synthetic grease will work? Says its for Wheel bearings, Chassis, Suspension and Universal Joints.... Thanks
Anyone confirm if Mobil 1 Synthetic grease will work? Says its for Wheel bearings, Chassis, Suspension and Universal Joints.... Thanks
it should be fine
my st205 swapandour Beams swap
For those who did this, I'm having a ton of trouble removing the two plastic cups from the old shifter. My short shifter (and most of ebay's) don't come with the 'cup remover'. I've tried it several ways and even pliers, but they're on tight. Helpppp me plz. 
Any suggestions?
This post has been edited by Starcraftjunkie: Sep 3, 2006 - 11:35 PM
Any suggestions?
This post has been edited by Starcraftjunkie: Sep 3, 2006 - 11:35 PM